PDA

View Full Version : ep3 (ctr) suspension



e-Quip
03-12-2003, 02:23 PM
hi , I'm new to the board ... I'm about to buy the CTR suspension
and I need help on how to do the 5 lug conversion. I never done it before, so I need to know what parts do I need ?
I was told the front was damaged, I could only use the wheel hub, rotor & caliper .. is that all I need for the front ?
the rear is in good condition , even the lower arms...
thanks ,

e-Quip
03-12-2003, 02:25 PM
caliper

e-Quip
03-12-2003, 02:28 PM
whoa !

chunky
03-12-2003, 03:04 PM
Originally posted by e-Quip
hi , I'm new to the board ... I'm about to buy the CTR suspension
and I need help on how to do the 5 lug conversion. I never done it before, so I need to know what parts do I need ?
I was told the front was damaged, I could only use the wheel hub, rotor & caliper .. is that all I need for the front ?
the rear is in good condition , even the lower arms...
thanks ,

main parts that you need for hte front are the knuckle, hub, disc, caliper, caliper bracket. The stock suspension on the EP3 should attach to the knuckle w/o any modification.

Jontis
03-13-2003, 05:31 AM
Can some one tell me why the euro CTR can't have the same calipers as the JDM??? :mad:

AkronSi
03-13-2003, 06:38 AM
Man, those rotors look like them been sitting outside for a couple months! If you do this, take some pics. Are you going to use the CTR springs too?

JLannoo
03-14-2003, 06:54 PM
Originally posted by Jontis
Can some one tell me why the euro CTR can't have the same calipers as the JDM??? :mad:

Well At least you can buy a Type R of some sort :)

goy091
03-15-2003, 06:16 PM
cool, hey if you could, check the dampers for the rest of us, just to see if theyre the same as the US Si ones.

shelman
03-18-2003, 01:49 AM
yo! you want to sell me your stock rear rotors calipers and hubs...both left and right of course

e-Quip
03-19-2003, 02:16 PM
I think I'll hold of on this ..
its something I can do without for now..
and yup, I'll sell my stock suspension when the time comes ..

todaCspec
03-19-2003, 04:36 PM
How much are they asking for this? Are they including the master brake cylinder and reservior?

Mr.02BlackSIguY
03-19-2003, 11:05 PM
where did u get the type r suspension from? looks tite, alil dirty but its all good.