spoon

[joshua]

was looking at spoon website and all these things are for the type r i wonder if it will fit on ours
1 THROTTLE BODY
2 BRAKE ROTORS
3 BRAKE HOSE LINES
4 RADIATOR HOSE KIT
5 ALUMINUM RADIATOR STREET TYPE:D

[SiRman]

1 THROTTLE BODY: Yes
2 BRAKE ROTORS: Probably wtih the wheel hub conversion to 5 lug
3 BRAKE HOSE LINES ?? Don't Know??
4 RADIATOR HOSE KIT ??Don't Know??
5 ALUMINUM RADIATOR STREET TYPE ??Don't Know??

[fsugatorbait]

Damn that Spoon throttle body is 70mm...thats a 8mm upgrade over ours, but i guess at $500 and change you sure would be payin for it.

[jaydub]

Tell you what, give me an engraver and a sharpie, I can write spoon on anything you want and it'll have the same horsepower increase. :D

[simann]

Can I mail you my throttle body Jaydub? I want "Spoon" written on my thrott;e body....I heard this gives me 30 HP easy! hahaha


The throttle body upgrade will not give the gains you would be expecting. You would be flowing in greater amounts of air into the same size (stock) manifold and intake valve/exhaust ports.
Also to use the extra air, new bigger duration and lobe height cams would also need to be used.;)

[l33t]

i will give you a list of everything spoon makes for the ep :

Damper kit
Progressive springs
Sw338's
Strut Tower bar
lower arm bar
monoblock caliper
brake rotors
brake pads
brake hose kit
air cleaner
throttle body assembly
4-2 exhaust manifold
2-1 exhaust manifold
4-2-1 exhaust manifold
exhaust pipe B
N-1 muffler
Sports computer, available for MT and AT
Battery
earth code
clutch slave hose
aluminum radiator
SEP radiator hose
lower seat position slider
steering wheel
Blue wide angle mirror


and yes, pretty mcuh anything having to do with a k20a2 probably won't fit, the computer i think will work though, but a revlimit of 8500 may be a bit much for the a3

oh and i think the throttle body does fit on the a3

[simann]

Yes, the throttle body will work...its because we have the RSX type-s throttle body.
We also have the "integra" RSX-R short runner maniflod as well. :D

[BlackNRedSi]

how are the spoon springs? anyone? hows the drop? hows the install?

Eric

[PAsi]

i emailed A&J Racing and they said that the radiator was not available yet.

[SiRman]

how are the spoon springs? anyone? hows the drop? hows the install?
They aren't available yet, but I will let you know the info as soon I get them, hopefully within a month.:)

[GeNoZiDe]

i want the SPOON ECU
LOL how much how much!?! pulls out wad of 100's LOL

[klik]

Originally posted by Mudokon
i will give you a list of everything spoon makes for the ep :

Damper kit
Progressive springs
Sw338's
Strut Tower bar
lower arm bar
monoblock caliper
brake rotors
brake pads
brake hose kit
air cleaner
throttle body assembly
4-2 exhaust manifold
2-1 exhaust manifold
4-2-1 exhaust manifold
exhaust pipe B
N-1 muffler
Sports computer, available for MT and AT
Battery
earth code
clutch slave hose
aluminum radiator
SEP radiator hose
lower seat position slider
steering wheel
Blue wide angle mirror


and yes, pretty mcuh anything having to do with a k20a2 probably won't fit, the computer i think will work though, but a revlimit of 8500 may be a bit much for the a3

oh and i think the throttle body does fit on the a3


U forgot to mention Head gasket

[spoon3168]

Originally posted by klik



U forgot to mention Head gasket
if he forgot to metion head gasket, then u mention him the heat barrier tape, wheel nuts, windshield banner, decals, shift knob, carbon bucket seat, seat rail/low position seat slider, etc....
j/k :D

[JSIR]

have you ever seen the cost of the Spoon radiator hoses , let alone the radiator, they are horrendously priced.

The 70mm isn't very good, the 70mm is measured at the leading edge, not the throttle valve, it pretty much uses the stock bore and throttle valve, they just taper it 70mm at the leading edge.

I'm using the Spoon rad fan switch, and the Spoon rad cap. I like both of those parts, reasonably priced too.

Joey

[PAsi]

i emailed www.inlinefour.com and they said that they didn't have a thermoswitch out for the 02-03 Si. Is there gonna be a diff between the RSX one and the Si one?

[JSIR]

Originally posted by PAsi
i emailed www.inlinefour.com and they said that they didn't have a thermoswitch out for the 02-03 Si. Is there gonna be a diff between the RSX one and the Si one?

the one I am using is the same as the RSX and is the same part number as the one for the 99-00 Civic Si and other b-series engines. It fits and works fine. The rad cap is also the same as the 99-00 Civic Si. hth.


Joey

[simann]

Did you have a noticeable time decrease for the fan to switch on?
:o

[JSIR]

Originally posted by simann
Did you have a noticeable time decrease for the fan to switch on?
:o

it comes on more often, so I guess the answer is yes, it pretty much has to in order to keep the rad fluid at a lower temp. hth.

J.

[KeNnYtAkEr]

If u wanna see in detail which will fit goto this site

http://www.aj-racing.com/spoon-sports/ep3.html


I don't like those inlinefour guys... takes forget to get a reply and they seem alil rude.

Anyways Try that site out those guys r friendly and very helpful and they know there spoon/buddyclub stuff. I guess thats it good luck

[KeNnYtAkEr]

If anyone has the Front and Rear Strut bars installed can u pls post a pic of them thanks.

I know U love to Spoon it babe!

[SiRman]

Guys at A&J are great!