Part number?

[FACTION95Si]

When I got my alarm installed last week the installer chewed up these two pieces on my dash with a screwdriver or something. I need the part # for the flat cover piece on the dash and the button cover.

http://www.faction95.com/si/dashpart.gif

Anyone have these part numbers handy or know what the official name for these 2 parts are?

[esmith13]

If you call a honda dealer and ask for the parts desk, they will give you the part numbers over the phone...

Eric

[JLannoo]

Originally posted by FACTION95Si
.... I need the part # for the flat cover piece on the dash and the button cover.

Anyone have these part numbers handy or know what the official name for these 2 parts are?


http://www.slhondaparts.com/browse.asp?Model=CIVIC&Year=2002&TrimLevel=3DR+SI&TransLevel=5MTKA&Section=G&Category=B++3715%7CINSTRUMENT+PANEL+GARNISH+%28PAS SENGER+SIDE%29&Emissions=KA&PartCatalogId=13S5S0

#13

77271-S6A-G21ZB GARNISH, SHIFT LEVER
(FLAT ALUMI) $36.95

#14

77272-S5T-A00ZA LID, CIGARETTE LIGHTER
(FLAT ALUMI) $7.71


http://www.slhondaparts.com/images/PCI/13S5S0/007/5.jpg

[FACTION95Si]

JLannoo you are da man!

I went to Hparts.com and found them a little cheaper

Shift Lever Garnish $33.28
Cig Lighter Lid $6.95

These prices are still out of control but a lot better than what my local dealer wants for them. Those bastards want $62.00 and $15.00 for the two parts!

[JLannoo]

no prob, glad you found even lower prices. I like the site I posted because its very easy to look up parts. :)

[siver-SI]

Thanks for the link there. I needed some help looking for a part out of an Accord to do a custom thing to my EP that I want to do but my dealer has no idea how to get or find the part for me. I do not want to say what it is yet but I want to get it done this year and I should be in the $100 range. When I do get it done I am going to post the hole install though and part numbers because I have a feeling some other have not thought of this but will like the idea.

[IceD out N CALI]

nice link, i like the breakdown it has on the parts

[padelong si]

Anyone know were I can get that same shiter plastic trim except made for european car? See I want my emergency flasher on the passenger side and cigarat lighter hole on the driver side so I can put in a S2000 starter button in the lighter hole. I think it would make this conversion alot easier.

[JLannoo]

Originally posted by padelong si
Anyone know were I can get that same shiter plastic trim except made for european car? See I want my emergency flasher on the passenger side and cigarat lighter hole on the driver side so I can put in a S2000 starter button in the lighter hole. I think it would make this conversion alot easier.

I dont think that piece is symmetrical.

[I SELL HONDAS]

if the installer was paid , he should be buying th parts!
thats why they call him a PRO , if the installer was a friend then ....oh well:eek:

[FACTION95Si]

The thing is that I didn't notice the damage untill a few days after the install. This place sucks so I don't want to deal with it anymore. I'm just going to wash my hands of it and cut my loses.