SNEAK PEAK!! My XenonDepot Philips H4 hi/Low convesrion Kit

[Frank@XD.com]

It Finally arrived!!! Whooo Hooo
Here are some sneak peak pics of the kit!

Stay tuned for Part 2 when i actually install them :D

The Kit:
http://members.rogers.com/frank21/Extra/New%20HID%20Kit.JPG
http://members.rogers.com/frank21/Extra/New%20HID%20Kit4.JPG

The bulb:
http://members.rogers.com/frank21/Extra/H4%20High%20Low%20Bulb2.JPG
http://members.rogers.com/frank21/Extra/H4%20High%20Low%20Bulb3.JPG

Proper H4 Connector:
http://members.rogers.com/frank21/Extra/H4%20Plug.JPG

[BarracksSi]

Somehow, that shield looks like it covers too much of the bulb to enable high beams. Regular H4 hi-low bulbs only have a shield over one filament, and no shield over the other. Correct me if I'm wrong.

[1fastminivan]

are those the philip Ultinon 6000k bulbs? Would they offer a 4100k version?

The bulb is covered up just fine........trust me.......there will probably still be some glare even with that. The only bad thing I notice on this is that the actual chrome shield is still chrome on the inside where the bulb sits.........this should be flat black for glare minimization purposes.......and that can be fixed easily by paint. The kit looks very clean and well put together. I cant wait for pics..

Some on wall pics...with low and high beams working.......then some down the road pics.....like a drivers point of view.....with low then high beam pics. :)

[Tekdemon]

*drool* too bad I get the feeling the pricing isn't going to be fun =P

[Frank@XD.com]

the kit will be offered in 4k, 5k and 6k!

Pics are on the way!! just need to find some time to do a nice clean install!

Pricing is on its way! No worries!

[03hatch]

any good news? :)

[Frank@XD.com]

Here is a link to the same thread but in the EP discussion forum!

http://www.ephatch.com/forum/showthread.php?s=&threadid=11911

it got more responses over there!