FACTION95Si
05-14-2003, 11:00 PM
I just picked up a CTR shiftboot today. I took some pictures of the two different boots so you could see the difference between the two.
CTR Boot on the left SI Boot on the right
http://www.faction95.com/si/boot/boot1.jpg
http://www.faction95.com/si/boot/boot2.jpg
They are identical except the for the silver ring on the top. The CTR boot lets the shifter slide through. The Si boot as you know clips into the knob. It also looks like the CTR boot ring sits a little lower.
http://www.faction95.com/si/boot/boot3.jpg
Here is the CTR boot installed on my EP. I have a previous generation CTR (EK) shift knob with the OEM reverse thread nut. I had to wrap a little duct tape around the shifter to get the boot to stay up on the shifter.
CTR Boot on the left SI Boot on the right
http://www.faction95.com/si/boot/boot1.jpg
http://www.faction95.com/si/boot/boot2.jpg
They are identical except the for the silver ring on the top. The CTR boot lets the shifter slide through. The Si boot as you know clips into the knob. It also looks like the CTR boot ring sits a little lower.
http://www.faction95.com/si/boot/boot3.jpg
Here is the CTR boot installed on my EP. I have a previous generation CTR (EK) shift knob with the OEM reverse thread nut. I had to wrap a little duct tape around the shifter to get the boot to stay up on the shifter.