cybernation ep3 turbo kit $4,400

[tony speed]

http://www.cybernationmotorsports.com/

[mhx]

i hope thats the installed price.. cause its too HIGH

[Jodster]

That is a really high price. I remember seeing a kit on there site for the K20 that included all of that plus interior gauges, fuel pump, fuel lines, and a bunch of other stuff for $5000.

[tony speed]

1) T3/T4, 60-1 or 62-1 Turbo
2) Custom Manifold
3) Turbo Piping
4) Wastegate
5) Apexi S-AFC
6) Spearco Intercooler
7) Intercooler Piping
8) Blow Off Valve
9) 550 cc Injectors
10) Vortec FMU
11) 250psi fuel & Oil Lines
12) Cybernation Black Magic ELF

[Si4U2NV]

shops a few min from my house...installation is $750

-Mike

[02SilverSiHB]

Originally posted by Si4U2NV
shops a few min from my house...installation is $750

-Mike
if that includes tuning, that's an awsome price!

[ssvr6]

It includes an hour on their in house dyno. I think the install price is great.

I was speaking to Paul at Cybernation yesterday. When they made this kit, they went all out and used the best parts that they could find.

They're thinking of offering a list of parts that the buyer can choose from. This way they can mix and match and possibly save a few dollars.

Steve

[Jodster]

Those are really nice parts. With that kit we are looking at 240whp, right? Looks like its time to save some money up!!

Do they have a payment plan?:o :D

[Jodster]

Do you guys think our stock motors would be able to hold 10 psi on a regular bases? It would be sweet to be able to make 260ish WHP with that kit.

[IceD out N CALI]

kinda expensive, but u get what you pay for:)

[ssvr6]

You can run 10psi, but it's not safe. I'll stick with 7 until I can afford the upgrades for stage II.


Steve

[JruSi02]

wow... i saw the stage 4 kit and my jaw dropped when i saw the rsx-s got 700whp, i wonder if they'll be doin stage 3 and 4 for our cars and if we'll get in the upper 600whp range, even though its like 12,000 it'd still be nice to have a 670whp ep3... i guess for now all i can do is hope i win the lottery or find a money tree

[ssvr6]

Where are you seeing these numbers at?


Steve

[ssvr6]

Nevermind, I see them. Wow!



Stage III RSX Turbo kit

Upgraded pistons, rods, sleeves, springs & retainers and Cybernation wide turbo cams 450+whp at 25psi starts at $8995

Stage IV RSX Turbo kit

Fully built race engine upgraded everything 30 to 40psi 550whp to 700+whp starts at $12595



Steve

[IceD out N CALI]

:eek: would be nice to have that type of power:D

[KirbEE]

Originally posted by Jodster
That is a really high price. I remember seeing a kit on there site for the K20 that included all of that plus interior gauges, fuel pump, fuel lines, and a bunch of other stuff for $5000.


Where did you see it then? Can you let us know.:)

Why dont you find out first, so you can help us out.

Are you sure or are you bullshiting?

[Jodster]

Originally posted by KirbEE



Where did you see it then? Can you let us know.:)

Why dont you find out first, so you can help us out.

Are you sure or are you bullshiting?

Thats the problem, I really don't remember where. It was either Cybernation or it was Revhard. But I do remember it was due the developing stages of their turbo kits and it only said for K20 and showed pics of a RSX. And said estimated price of $5000. But this was a while back. Sorry I can't be any help.

[Delta Mike]

Originally posted by Si4U2NV
shops a few min from my house...installation is $750

-Mike


Hi guys.

I'm looking into this kit. Problem is that I don't know of any shops to take it to to be installed. I live in abilene Texas (About 200,000 population). How do I go about finding a reputable shop near me?


Any help?

[ssvr6]

The kit isn't that hard to install and does require some tuning. Try and find a shop that deals with turbo'd cars. (DSM, Subaru, even a reputable Honda/Acura tuner.)


Good luck.


Steve

[Delta Mike]

Thanks SSVR6

Peace

Mike

[ssvr6]

Originally posted by Jodster
Do you guys think our stock motors would be able to hold 10 psi on a regular bases? It would be sweet to be able to make 260ish WHP with that kit.

Well, I'm gettin' 262 at 7.5. Cybernation is confident that the engine can go as high as 12lbs on stock internals. However, my clutch would not be happy with that.


Steve

[02TafWhtSi]

Originally posted by ssvr6


Well, I'm gettin' 262 at 7.5. Cybernation is confident that the engine can go as high as 12lbs on stock internals. However, my clutch would not be happy with that.


Steve

Amazing Steve ! :eek:
You are the man ;)

[tony speed]

yum yum. 12 psi. i'm feeling the need for greed

[mental]

all i can say is holy shit!!!! a honda with over 200tq!!! wow!!! so Steve would you recommend the revhard kit or the cybernation kit cuz they both seem really nice and the cybernation kit makes higher numbers... hmmm...:p :p :p :p :p :p :D :D :D :D

[iron monky]

--------------------------------------------------------------------------------

Stage III RSX Turbo kit

Upgraded pistons, rods, sleeves, springs & retainers and Cybernation wide turbo cams 450+whp at 25psi starts at $8995

Stage IV RSX Turbo kit

Fully built race engine upgraded everything 30 to 40psi 550whp to 700+whp starts at $12595

--------------------------------------------------------------------------------

newbie her with a couple of questions on cybernations kit....

i was wonder what kind of head gaskets are they using and if they have figured out that the factory head bolts are strecthable and have a tendany to(stretch) meaning the head will be lifted from the block at high boost. arp has not released any bolts and cybernation has none either i checked. now at high boost meaning anything over 17psi the head will start to push away from the block. I have concern's on this due to the fact that i have done a lot of research and all come out the same people are over looking those very little but veryu important facts.

[ssvr6]

I agree about the head bolts. However, they are, and have been running over 20lbs on their RSX-S and it's had no issues like that. I'm not saying that you're wrong, but are you sure there are no bolts from ARP or maybe a competitor?

Steve

[iron monky]

from arp them selves they have made none and cybernation is using the stocks one from the last conversation i had with one of the reps. if so it is very dangerous to go high boost and it is not recommended. but hey i can't say anything since i don't build turbocharged k series like if i drank water like cybernation does everyday in and out. just a curious mind at work. ep owner very soon thats why.

[ssvr6]

No, no, I hear what you're saying. I thought that bolts were part of the stage II kit. I'm going by there today, I'll ask them about it.


Steve

[iron monky]

thats cool mankeep me posted cuz the turbo kit sounds interested but i have tomake sure every detial is not overlooked

[ssvr6]

I hear ya.

You're from JDM Universe right? I posted pics of my boosted Si on there.


Steve

[iron monky]

ye thats me man the one and only.did you find out about the bolts and head gasket man.