PDA

View Full Version : WOW, What a difference...Comptech Exhaust and Injen CAI installed...PICS



02SilverSiHB
05-23-2003, 03:52 PM
I put my Injen CAI on yesterday. Big difference compared to the short ram I had. I have more torque now and the throttle response is great!

I didn't take pics of the cai, since everyone has seen plenty of pics of those.


Today, I was asleep..tired from work...and all of a sudden my dogs were barking like mad to wake me up, I was pissed at first, but I found out why! They were telling me the UPS guy was here to deliver the comptech! :D He almost left, but I caught him in time...thanks to my heros Hunter and Gizmo :D
I just installed the comptech. Wow, easy install, fit great. First time I started it up, I was surprised to hear such a deep tone. I like it! Then when I took it for a test drive, I was very suprised how deep it was through all rpm until about 6000rpm you don't hear the exhaust much. The exhaust is definitely louder than I thought, I was a bit dissappointed with that at first, but I've already gotten used to it. It's relatively quiet at 60mph, 70-75. At cruise at 80mph it is a bit deep, maybe too deep for a long trip for some...not annoying, but maybe for some people it would be too much.

Peformance wise my car pulls even more now, and no torque loss. The B Pipe weighs the same as stock: 14.5lbs The muffler is 14lbs where as the stock one is 15.5lbs. The piping is about the same diameter on the flange to the cat as the stock one, but immediately opens up to 2.35" The stock B pipe was very small at the muffler 1.5"
The tip comes just about flush with the rear bumper. Overall, I'm very impressed with comptechs design, the fitament is the best I've seen. I've been through Apexi and HKS exhaust on my last car and this is by far the best fitament. No heat sheilds come close to hitting the exhaust pipping, no raddling, nothing. Perfect. I noticed that at the cat, my stock exhaust did not have a gasket! I know on my last car, I had one, I was surprised to see this. Thank fully I had some extra Mr. Gaskets handy for that. The comptech comes with a ring gasket for the muffler to b pipe.
Here's the pics
B pipes to muffler
http://www.imagestation.com/picture/sraid63/pa8b53ce3c5a39344f29db46b6acb7e56/fc173764.jpg

B pipe to cat
http://www.imagestation.com/picture/sraid63/p901767cdfbfd1713726502d98d5203a2/fc173760.jpg

http://www.imagestation.com/picture/sraid63/p77cf38002d22833fc28dcf49c7b1acda/fc173751.jpg

http://www.imagestation.com/picture/sraid63/p95900204df9fa3f785b2778f0e2b8857/fc173746.jpg

Gizmo the hero
http://www.imagestation.com/picture/sraid63/p335c21048a5888eb7f5609b5684070d7/fc173745.jpg

Hunter the hero
http://www.imagestation.com/picture/sraid63/p94fab8c790f188dd3f06221c45f9e993/fc173743.jpg

I'll attach the pics of it on the car so I you can see the bigger images.

02SilverSiHB
05-23-2003, 03:54 PM
rear view

02SilverSiHB
05-23-2003, 03:55 PM
side view

Suk02Si
05-23-2003, 03:59 PM
Looks good:)

fishboy
05-23-2003, 04:00 PM
lookin good. glad you finally got a CAI. oh and your koni sticker is not centered.:p

SHAKEnBAKE
05-23-2003, 04:14 PM
Nice, looks like Mugen, but much better!!
Nice dogs, you better treat them someting good for saving you another day of waiting!!:D

02SilverSiHB
05-23-2003, 04:17 PM
Originally posted by fishboy
lookin good. glad you finally got a CAI. oh and your koni sticker is not centered.:p
:D yeah I know... I put it one during the night...I need to take it off, it is outta place, I'm just too lazy.

I may slap on my wifes 14's and take the car to the track and see how it goes. I should hopefully have dyno numbers tomorrow.

fishboy
05-23-2003, 04:48 PM
sweet let us know how the dyno and the track goes.:) i will use your dyno to gauge the hp on my car. i am curious i how much hp my car has, but i am too cheap to shell out the cash for a dyno. i'll just use my friend's gtech.:D

02SilverSiHB
05-23-2003, 05:31 PM
Originally posted by fishboy
sweet let us know how the dyno and the track goes.:) i will use your dyno to gauge the hp on my car. i am curious i how much hp my car has, but i am too cheap to shell out the cash for a dyno. i'll just use my friend's gtech.:D
I'm going to go ahead and leave now for the track :D I hope I do well! I put my wife's 14" rims on. She has cheap tires, but hey, better than using my heavy ass 17s

02TafWhtSi
05-23-2003, 06:44 PM
looks nice! understated but sweet

RacingCivicSi02
05-23-2003, 07:40 PM
Looks good. How bout some sound clips??

TezGari
05-23-2003, 08:08 PM
Originally posted by RacingCivicSi02
Looks good. How bout some sound clips??

Sound clips would be sweet.

02SilverSiHB
05-23-2003, 10:33 PM
Originally posted by trinispeed


Sound clips would be sweet.
I wish I had something that I could use like that. If anyone near me has something like that, I could meet up with them. I have a camcorder, but nothing to load it up with. I just have a regular camcorder, not the digital kind.

But I will tell you, I've heard the greddy, and I really think mine is way deeper, imo.

IceD out N CALI
05-24-2003, 12:32 AM
sweet

02SilverSiHB
05-24-2003, 09:52 AM
Here's a pic I forgot, it's both mufflers. The stock one is on the left. The stock one appears bigger, but actually decreases in diameter once you look inside the piping. It appears bigger at first because it has to connect to the stock b pipe. But it's a good sized piping compared to the stock b pipe.
http://www.imagestation.com/picture/sraid63/p64c3f111fb19cabb25cbe1b8a6fc9401/fc163084.jpg

EP33
05-24-2003, 04:12 PM
That is one clean arse exhaust. The thing looks like it was assembled very very well. Nice welds. Looks good on the car too. Great pics. . . Did you sell your SRI?

02SilverSiHB
05-24-2003, 04:47 PM
Originally posted by EP33
That is one clean arse exhaust. The thing looks like it was assembled very very well. Nice welds. Looks good on the car too. Great pics. . . Did you sell your SRI?
thanks, yeah, I just sold the sri to some already.

I have some sound clips, anyone know where I can put them on the web???

mental
05-25-2003, 08:01 PM
but bot exactly my taste... :)

Dres97
05-25-2003, 11:21 PM
ahhh after reading ur post u solved my problem.... i put a post up earlier about my Comptech gargling and i didnt know why.... now i know why... its because i didnt have a gasket to put in between my cat and my exhaust so now it sounds great!!! :p

02SilverSiHB
05-26-2003, 12:18 AM
Originally posted by Dres97
ahhh after reading ur post u solved my problem.... i put a post up earlier about my Comptech gargling and i didnt know why.... now i know why... its because i didnt have a gasket to put in between my cat and my exhaust so now it sounds great!!! :p
yeah I found it strange there was no gasket...weird. I used a mr. gasket 2.5 inch one.

02SilverSiHB
05-26-2003, 05:07 PM
Originally posted by RacingCivicSi02
Looks good. How bout some sound clips??
Not sure if you and trinispeed saw this post: http://www.ephatch.com/forum/showthread.php?s=&threadid=14221

hamlet9634
05-26-2003, 05:19 PM
that's a real purrty exhaust man

HondaMan
05-26-2003, 07:47 PM
Sweet!!!

02SilverSiHB
05-29-2003, 12:29 PM
Just an update guys. I'll be going to the dyno on Tuesday, so you should all expect to see a post of my dyno numbers that day...probably about 7pm Central.

HondaMan
05-29-2003, 12:57 PM
Originally posted by 02SilverSiHB

thanks, yeah, I just sold the sri to some already.

I have some sound clips, anyone know where I can put them on the web???

BTW, I can host the sound clips.

golferjn
05-29-2003, 05:48 PM
looks nice

02SilverSiHB
05-29-2003, 06:53 PM
Originally posted by HondaMan


BTW, I can host the sound clips.
:D mhx already got them up: http://ephatch.com/forum/showthread.php?s=&threadid=14221

SiR_YO
06-17-2003, 09:10 PM
u have results from dyno?

just curious why not go with comptech ice box too?