rook
05-24-2003, 03:39 PM
I installed my H&R springs and ingalls camber kits today. It went very smoothly. Thanks to the people on this site who shared their knowledge and experience. I had done alot of research for the proper installation, gathered the correct tools and had all of the needed parts before I began. Air tools and the tie rod puller were excellent choices. I have never done anything close to this type of work, but it only took 5 hours in my own garage. Thanks again for the information I found on this site! Took a quick drive and the drop and spring rates are perfect for Colorado roads. Not as harsh as stock. Looks real good too.
rook
H&R springs, 2"drop
ingalls camber kit
Nakayama Zoro 10's, 18x7.5
Nitto 450's, 215 40's
15% tint all the way around
rook
H&R springs, 2"drop
ingalls camber kit
Nakayama Zoro 10's, 18x7.5
Nitto 450's, 215 40's
15% tint all the way around