PDA

View Full Version : What do you want on you EP???



Febrezee
08-15-2002, 07:58 PM
Realisticly, what do you plan on doing to your SI. Please feel free to post a full list of all the mods you want on the budget you are willing to spend.....

Just curious what every one is thinking of....

Personaly here is my plan:
K20-R (Spoon tuned) w/6 speed tranny
Turbonetics T3/4 Hybrid with ceramic BB
Spearco Intercooler
Venom VCN-2000
Spoon B pipe
Spoon N1 exhaust
" Tie and strut bars
" coilovers
" throttle body
" engine dress up parts
" 2-1 exhaut manifold
Brembo big brakes and caliper
17x7 Volk GT-n's in gunmetal
BFG Comp TA ZR SSS
HKS Concept body work
Type R read Seats
Type R Shifter
HKS Ignition
HKS Controllers
HKS CAMP
Kenwood KVT911
Kenwood Nav
Boston Acoustic Components
JL amps
JL 12w7 x2

Well thats the none detailed list....

02SilverSiHB
08-15-2002, 08:14 PM
I'm looking into just this:

Body kit...not sure yet which one
Rims..17"
Tint
CD changer
Cat back exhaust...that isn't the size of a fart can and loud as shit
Header
Down pipe
Carsound catalytic converter
Injen CAI
Springs...need to be installed
Shocks...something that replaces the whole unit, not just the top of the stock one
Upgrade sway bars
Rear tie bar
Front and rear upper strut bars

And that's it. I don't care to be super fast in this car. I say that now, but you never know...turbo? Maybe, way down the road. I'd rather sit back and watch others do it and see how it goes

David K.
08-15-2002, 08:23 PM
Pretty expensive list!!!

Here's mine, not cheap, but I think I can get it done over time....

comptech header
hi-flow cat
jic titanium exhaust
gude (or other) head and cam pkg. w/ springs & titanium retainers
larger throttle body and port matched intake
copper head gasket
nitrous (prefer direct port), adj. regulator, fuel rail and injectors
quaife LSD
aluminum or chromoly flywheel and upgraded clutch
17" velox pg5s w/ bfg g-force kdw tires
comptech titanium strut brace
comptech sway bar/brace combo
wilwood big brake upgrade w/ 4 piston dynalite calipers
ignited push button start (trick!)
custom guage cluster under cd player
spoon, mugen, or other silicon hose kit
ecu upgrade
anything else that will reduce weight!!!

HondaMan
08-15-2002, 08:44 PM
See this link for my list and more:
http://www.hondaman.onlineshowoff.com

2k2civicSi
08-15-2002, 09:07 PM
i want

comptech icebox
comptech headers
T r&d exhoust
17in konig traffiks in carbon with a 215/45/zr17 tire
coilovers with koni yellow shocks
type-r side skirts
jr super charger
type-r lights
nx kit
thats it for now

SpeedRacer
08-15-2002, 10:57 PM
well i cant think of everything right now plus it is a waste of time till i can actually do it but what i will be doing soon of the top of my head is

mugen grill
DC headers (when available)
tint windows
type R wing
Port and Polish my head
bore out intake manifold and throttle body
get side markers shaved off
Adj Shocks to get my car lower
Sway bars/Tie bars/strut bars
forged pistons
Rods
that's it for now but im sure all this will probly take 1-2 years in it self some stuff will happen quickly but the port and polishing will take longer because it cost alot

Burgh
08-16-2002, 07:54 AM
What do I want on my EP? I want a good deal. :D
(haven't had time to go buy one yet).

ApexinSi
08-17-2002, 05:30 AM
Here is my list of future mods.
those windshield whiper nossles that light up at night.
some neon lights under my car.
a huge "R" sticker in the rear window.
Lots and lots of vynl
A shift knob that lights up












:D

Cone Killer
08-17-2002, 05:05 PM
I don't want anything....well...maybe a larger sway bar...but that's it.

ssvr6
08-19-2002, 08:06 AM
Header (Not sure which brand or style)
2.25 exhaust to the stock muffler
and anything else bolt on for NA power then I'll either go N2O or Turbo.
SSR Comp 16"
Tires (Don't know yet...need to think about that..)
H&R Springs (possibly cup kit)
Paint the head lights (only costs my time and a can of paint)
Have my signals, side markers, and tail lights tinted (guy who did my Passat)
That's it for now....

I could care less about looks, as long as it's fast. (That and I don't care about JDM either....KMart could make it and if it was decent quality, I'd buy it.) :D

Steve

fishboy
08-19-2002, 11:04 AM
hmmmmm, off the top of my head:

comptech header
dc exhaust
hi flow cat
cross-drilled rotors
spoon pads
tein full coilover kit
tein electronic damping force controller
mugen rear sway
strut bars whatever brand, mugen or spoon maybe
internals worked on maybe
arm bars
nitrous
turbo and everything else that comes along with it

Silver '02 Si
08-21-2002, 10:17 PM
Well, I may be crazy but here goes...

19" x 7.5" Racing Hart CR's
BFG GForce T/A KDW 215/35-19
Tein Flex full coil-over set-up
19mm rear sway bar RSX-s
Upper Ft./Rr. Strut Bars (brand to be decided later)
Any other minor susp. mods needed at this time...
DC Sports Header
DC Sports Cat-Back (maybe Greddy)
Injen CAI
Type R style or other body kit
Carbon hood (painted on hood to match fenders at body lines)
Custom interior painted trim (descretely)
Large throttle body
AEM big rotor upgrade (ft./rr.)
AEM progammable engine management
AEM fuel rail
High pressure radiator cap (spoon?)
Mild cams
Si floor mats (a must)
Injen engine cover
Jdm Valve cover
Zex Nitrous Sys. (maybe, if i get bored with the slowness)

Then come the big mods...

Port/polish/bored/stroked/balanced/blueprinted motor...$$$
Any other major motor work needed to get to vrooommin
Turbo/intercooler/bov/wg/etc...
If I get to this point I will not stop untill I have the fastest street legal si around...that is if $$$ falls from the trees...:p

2sloSi
08-21-2002, 10:30 PM
I'll make a list when i get my Si! :)

Even if i don't get one i'll make a list of stuff i would wanna get! :D

Si4U2NV
10-20-2002, 04:38 PM
yeah all i want ryte now is coilovers (or springs) and JDM style Type R rims... i dun really need anything else at the moment....

-Mike

BlasTech
10-20-2002, 05:50 PM
Eibach Pro Kit springs
Koni Yellows (after the stocks are dead)
Tint
Honda FP 16's (sigh)
Better Tires for AutoX/DailyDriver <-- Suggestions anyone?
CAI (which one is TBD, maybe DIY)
Hondata (TBD)

If I get any good at AutoX:
Bye Bye Back Seats
Bye Bye spare tire
Relocate battery.

If I become an engineering marvel:
DIY shift light
DIY 0-60 timer (run by the ECU signals)

02SilverSiHB
10-20-2002, 07:51 PM
Well, now my mod want to do list is as follows:

CTR engine swap (with tranny, ecu, and axles)
Spoon exhaust system (including header)
Buddy Club body kit
Rims....not sure yet, I'm struggling between Konig Absolutes or 5zigen MX-5's

fatboyhatch
10-23-2002, 05:17 PM
pre pare to be amazed

electric blue si ( when it comes out)
restitch all the red stitching to electric blue color
k-20a swpa with tranny
lambo styles doors from decah.com or .net idk
18' gunmetal w/polished lip ro_ja rims
toyo 225/35/18 tires
type-r sides and rear valence, buddy club front
smoked headlights
debadge it
injen intake cuz it adds 18.4 hp to the wheels on a rsx-s
comptech exhaust, mid pipe, and header
ngk spark plugs, new 11mm wires and ignition system
what ever turbo is out, intercooled w/ a direct 25 hp shot of NOS into the intercoolers sway bars, coilovers
7' sony dvd player dreamcast(god i luv that thing) in the glove box
2 audiobann 12's an amp for each, new mids en highs
re do the fuel system, vtech controller, engine managment, boost controller

rocket launcherthat pops out from the roof rocket engine to fly away with, machine gun that pop out of the headlights, nails that drop out at the touch of a button, and a hole shit load of NOS ENOUGH TO BLOW MY CAR TO PEICES IM NOT TALKIN NO PUSSY 250 SHOT IM TALKIN LIKE A 300000000 SHOT WHEN U PRESS THE BUTTON U GO REALLY FAST AT FIRST THEN UR CARS GOES PUUT PUUT THEN U START TO STALL THEN U HEAR KAAAAA-PUT THEN U SEE UR TRANNY FALL OUT THROUGH YOUR REAR VIEW MIRROR THEN U HEAR BANG!!!!!!!!!! AND UR IN THE HOSPITAL FOR THE REST OF UR LIFE!!!!!!! NOW THATS A FUKIN SHOT OF NOS


hey id use nos if i was to pussy to buy real engine mods and if i felt like killin a new car
:D :D :D :D
no pun to u guys that use it


ohhh and i forgot altezzas and grafics and some under the car glow soo i can look really fast to w/ the 3000000000 shot o nos

BarracksSi
06-24-2004, 03:24 PM
...and a hole shit load of NOS ENOUGH TO BLOW MY CAR TO PEICES IM NOT TALKIN NO PUSSY 250 SHOT IM TALKIN LIKE A 300000000 SHOT ...

LOL

Yeah, brought this thread back from the dead (came up in a search for "Mugen grille".. go figure).

I've now got Mugen Sports suspension, Rota 16" C8's w/ 205/50 tires, RSX-S sway, "Type-R style" shift knob (the older one, not quite CTR), and a couple other things, including a cf Mugen replica wing to be delivered tomorrow.

What I'd like --
Motor-wise... doggone it, I still don't know. Give me a blank check, and I'd probably drop in a K24 block with a Type S head, along with God-knows-what to run it. Realistically, I'd probably get an intake & Hondata (along with upgraded valve springs since I hit redline so often already, and I'll just be paranoid with stock springs), or JRSC.

Other go-fast stuff would be RSX-S hubs & brakes (or something similar), maybe Mugen sway bars & front control arms, and if I get silly (and/or sponsored for some strange reason), Mugen N1 suspension. There's a bunch of other little things that would be fun, too.

Appearance-wise, I don't want much. Either the UDSM CTR kit, or the CTR sides & rear with Mugen lip. I wouldn't mind ending up with an actual Mugen wing, too.

Am I in a Mugen rut, or what? :winkm:

15000rpms
08-31-2008, 05:17 AM
-Civic type r from the FD w/ 160mph top speed/tranny/bigger throttle body
-header from the engine (might have to modify the exhaust a little because the 4 door type r header might be longer or shorter.
-15,000rpms of power and torque w/ reliabilty. (Spoon could do it)
-Mugen front Lip (already have)
-type r side and rear skirts (already have)
-red emblems
-mugen grill
-mugen spoiler (already have)
-17x7.5 advan three spoke rims/probably nitto tires or bfg.
-red recaro seats
-type r shift knob
-custom tachometer
-best intake (currently have MR Injen Short Ram)
-smallest battery (so that I can custom an air duct to my short ram)
-engine torque damper (already have)
-front strut (already have)
-k-pro
-tein super streets
-more suspension components
-apex'i catback (already have)
-after clutch burns, ACT six puc
-non faulty tranny
-the most thing I want is... I want them free. LOL

I don't know how long it's gonna take.

BlueEP3
08-31-2008, 09:40 AM
The currents:
k20a (a3 ecu >_<')
type-r tranny
K&N typhoon series red
hks hi-power full system
testpipe
fogs
spoon torque dampaner
mugen cf replica hood
mugen cf wing
tanabe df210 springs(no coilovers yet =___=')
painted bronze stockies
momo 11" steering wheel w/nrg hub
mugen shift nob

future look/ wants:
k20a ecu
toda ITB
turbo (don't know which one yet)
toda itb converter to turbo (yes guys it is possible ITB TURBO!!!)
cusco 6 point rollcage
AIM digital cluster
mugen replica or authentic cf lip
mugen m7 rims
cf hatch
cf doors (the last thing)
cf side skirts
cf roof
mud gaurds
A/C condensor (mine got hit so its leaking so i have no ac T_T)
f2 coilovers
type-r door pannels
Depo projectors
type-r rear bumper
basically i need struts cus shit i have none from head to toe
spoon brakes
mugen air box



i think thats all of it... ^_^

DRP967
08-31-2008, 08:24 PM
-JDM window visors

VegaS10
09-01-2008, 04:57 AM
Thanks for digging up a 6 year old thread.

devinblue
09-01-2008, 10:07 AM
EP3 PROJECT CAR

1.) Radiator Fan Combo = $200.00

2.) Complete Pulley Replacement = $258.00

3.) Hondata Heat Shield = $50.00

4.) Throttle Body Bore = $100.00

5.) Throttle Body Spacer(not P2R) = $94.64

6.) Thermo Tech Exhaust Wrap = $7.00

7.) P2R Power Plenum = $104.98

8.) Tuning Pros Header = $48.90

9.) Tuning Pros Downpipe = $46.95

10.) Tuning Pros Cat-back = $302.90

11.) Honda Reflash = $500.00

Just waiting for my truck to sell, then I'll be golden. May even get the windows tinted and upgrade the stereo a little bit!!!

rburdios
09-01-2008, 10:10 AM
50$ for a header?

devinblue
09-01-2008, 10:14 AM
Yes Sir...and it's got a warranty....

MugenReplica
09-01-2008, 11:32 AM
Only thing I want now is AWD.:msmile:

OPTIMISE
09-01-2008, 02:15 PM
-15,000rpms of power and torque w/ reliabilty. (Spoon could do it)
-custom tachometer


:rofl::rofl::rofl:

k-powered
09-01-2008, 03:58 PM
NOTHING TOO CRAZY

Have some stuff already that i would of added


MUGEN PEDALS
MUGEN STYLE CF HOOD
CTR CF WING
CF HATCH
CTR LIP KIT
16-17" GOLD ROTA TORQUE'S
FULL SKUNK 2 OR FUNCTION AND FORUM COILOVERS/SUSPENSION
APEXI N1 OR WS2 CATBACK
DC SPORTS HEADER
JACKSONSVILLE SUPERCHARGER
WINDOW VISORS
DRILLED/SLOTTED ROTORS
HAWK OR GREEN STUFF BRAKE PADS
CTR SHIFT BOOT
JDM FOGS
TAKATA HARNESSES
RED RECAROS
RED CARPET
RED DOOR INSERTS
CAMS
CAM GEARS
BUDDY CLUB SHORT SHIFTER
ACT CLUTCH KIT/FLYWHEEL

Well lets see what else if I went a little more extreme or had lots of money
all of the above plus a roll cage, k20a swap and instead of sc go Turbo.

Lucid Moments
09-01-2008, 06:44 PM
EP3 PROJECT CAR

1.) Radiator Fan Combo = $200.00

2.) Complete Pulley Replacement = $258.00

3.) Hondata Heat Shield = $50.00

4.) Throttle Body Bore = $100.00

5.) Throttle Body Spacer(not P2R) = $94.64

6.) Thermo Tech Exhaust Wrap = $7.00

7.) P2R Power Plenum = $104.98

8.) Tuning Pros Header = $48.90

9.) Tuning Pros Downpipe = $46.95

10.) Tuning Pros Cat-back = $302.90

11.) Honda Reflash = $500.00

Just waiting for my truck to sell, then I'll be golden. May even get the windows tinted and upgrade the stereo a little bit!!!

Man save the money or the radiator and fan combo and the pulley's and buy a good header or K-pro. Both of those mods are worthless.

SiN05
09-01-2008, 06:49 PM
Not including the stuff I already have which ain't much

K24A2 w/ JRSC
RSX 6-Speed w/ Some sorta of LSD
04-05 EDM Bumper cover and lip
04-05 EDM Projector Headlights
04-05 EDM Mirrors
04-05 EDM Center Console
04-05 EDM Gauge Console
CF hood
Type R Side Skirts
Type R Rear Bumper cover w/ lip
Type R Fenders with turn signal delete
05-06 RSX Rims for the daily abuse
DC5R Silver Rims for the hotness
05-06 RSX leather seats but if I had the money to throw around some EDM anniversary edition Recaros
Some suspension work then a respray of CGP

thats if I had money, the slower process seems more fun though

Gunner02
09-05-2008, 07:34 PM
whats up with everyone wanting 17's on there ep? is it just me or do 17's look really bad?? To me, even if theyre nice the size looks horrible on an ep

clutch797
09-05-2008, 07:36 PM
rocket launchers.

HenHouseSuprise
09-06-2008, 12:39 AM
r crew header, spoon wheels, wiseco pistons, blue print rods, cf hatch, cf hood. thats all i need.

slo_k20
09-06-2008, 06:58 PM
coils, hfp wing, k24a1 swap, jrsc-r tuned, injen cai, stronger clutch, stronger brakes

DRP967
09-06-2008, 07:37 PM
whats up with everyone wanting 17's on there ep? is it just me or do 17's look really bad?? To me, even if theyre nice the size looks horrible on an ep

i dont want 17s, i like 16s on the ep.

devinblue
09-06-2008, 11:23 PM
i dont want 17s, i like 16s on the ep.

I have 17's and they look fine....I'd like to get some lowering springs to compliment though.

mattism78
09-07-2008, 09:59 AM
I want a post from 2002 to go away:tehehe:

BarracksSi
09-07-2008, 02:54 PM
whats up with everyone wanting 17's on there ep? is it just me or do 17's look really bad?? To me, even if theyre nice the size looks horrible on an ep

The Type-R came with 17s, and they look fine to me.

I think 16" wheels look just right, but the whole car looks better even with stock wheels when it's lowered just a little bit (merely an inch makes a big visual difference). It makes it look more like a VW GTi than a Dodge Neon.

BarracksSi
09-07-2008, 02:55 PM
I want a post from 2002 to go away:tehehe:

Hey, some of us remember when this thread was NEW... :mbiggrin:

nizmoluvep3
09-07-2008, 08:26 PM
i dont want 17s, i like 16s on the ep.

:iagree:

if i could do it all over again i would have stayed usdm instead of doing ctr conversions

bumpinhatch13
04-08-2010, 10:33 PM
K24
Boored to 2.6L
Jackson racing super charger
Carbon sparco seats
CTR body kit
CF Mugen Hood wing and Hatch
Spoon Engine torque Damper
Spoon Dress up parts
Diffuser (under car)
6 speed trans
spoon steering wheel
volk TE37
Tein Full coilovers
Flat black paint
Yellow headlight covers
Plexi Glass rear hatch window
Full spoon exhaust
Bottle o Vtack
carbon fiber moon roof plug

Kingboubou
06-07-2010, 03:36 PM
A really old thread, I want 20" spinners and a 6"tip on my cherrybomb. And flames, I was about to forget thems :)

Twisted-X
06-07-2010, 04:56 PM
'07+ K24A2 $2850
'06+ SI 6 speed $1300
Buddy Club Short Shifter $135
RSX JRSC w/auto tensioner $?
Mercracing.net aftercooler $760
Kiddracing Krusher Header $425
Progress Adjustable Coilovers $1300
Kmac front Camber/Castor Kit $370
Energy Suspension Full Kit $130
Wilwood Front BBK $576
Assorted chassis bars $?
Skunk2 RLCA $240


One can wish! :mbiggrin:

ezep3
07-07-2010, 04:38 PM
would love a J swap :thatsall:

trippy
07-07-2010, 06:04 PM
i would love for a naked girl on my ep