teaser....(56k gonna die)

[REVwheels]

http://michellesimm.com/ix_mia3.jpg

http://michellesimm.com/ix_mia2.jpg

more to come when i get her back tomorrow.

[CleanBlackSi02]

Now were talkin'! You got a bunch of stuff...fast! Looks great!

[ssvr6]

How much boost and how much hp?


Steve

[REVwheels]

ur not gonna believe me..but honestly i dont know...the car get up on the dyno tonite. its been in the shop since monday. currently at miami muffler getting piping redone. ima try to take the car up to tower shops(for all you miami peepz) to hang out.

steve what size exhaust piping are you running? and what muffler?

[silver ep]

Car looks great! How about a list of mods?

[ssvr6]

Originally posted by REVwheels

steve what size exhaust piping are you running? and what muffler?

I'm running a 2.25 midpipe and stock exhaust for the ultimate sleeper look. I'm also planning on anodizing the FMIC black to make it really low key.


Steve

[REVwheels]

no list yet...i still have a few things coming in and finish up. turbo should be done tonite or tomorrow. monday it goes for the audio make over then when that is done it will go back for a clutch.

[Steve02Si]

Originally posted by ssvr6


I'm running a 2.25 midpipe and stock exhaust for the ultimate sleeper look. I'm also planning on anodizing the FMIC black to make it really low key.


Steve

Why not fabricate a liquid-air IC setup? it could easily fit where the stock airbox was. You'd just have to route the filter elsewhere. This would drastically shorten IC pipe length, provide more airflow to the radiator, and be ultra stealth.

I've been watching all these turbo kits come out and I'm surprised that none have gone liquid-air considering the ridiculous pipe length required to get to the nose. I guess cost is a factor or possibly people are swayed by myths of liquid-air on a street car but if it's set up correctly it'll outcool an air-air.

[REVwheels]

Originally posted by ssvr6


I'm running a 2.25 midpipe and stock exhaust for the ultimate sleeper look. I'm also planning on anodizing the FMIC black to make it really low key.


Steve

so lemme get this straight...with a 2.25 midpipe and stock exhaust you dynoed 262 to the wheel?

[furious]

Originally posted by REVwheels


so lemme get this straight...with a 2.25 midpipe and stock exhaust you dynoed 262 to the wheel?

isn't that freakin unbelievable? ...oh yeah...he also has a Cybernation turbo;) :D

[-LAW-]

Car Looks Tight Robert ... Baller !!! :D

[IceD out N CALI]

looks good:)

[ssvr6]

Originally posted by REVwheels


so lemme get this straight...with a 2.25 midpipe and stock exhaust you dynoed 262 to the wheel?


"Jew got eet main" ;)


Steve

[02SilverSiHB]

Originally posted by ssvr6



"Jew got eet main" ;)


Steve
hey, did you ever post this on clubsi in the got boost forum :)

[jerky]

Originally posted by 02SilverSiHB

hey, did you ever post this on clubsi in the got boost forum :)

i think i saw his car in the SiOTW forum. he was getting lots o props.

and thanks for the wallpaper REVwheels!

[ssvr6]

Originally posted by 02SilverSiHB

hey, did you ever post this on clubsi in the got boost forum :)

Yeah I did. A few negative comments but mostly positive.

And yes, I did post in the SiOTW. I was surprised that I wasn't roasted alive.


Steve

[Will2K2]

Bumper Fitment = SHIT :eek:

Wheels = BLing Bling (weigh a ton?)

Drop = Cool

Hood = Cool

Graphics = (I know its for business,
but it still looks 2 Fast, 2 Ghey)

W

[REVwheels]

Originally posted by Will2K2
Bumper Fitment = SHIT :eek:

Wheels = BLing Bling (weigh a ton?)

Drop = Cool

Hood = Cool

Graphics = (I know its for business,
but it still looks 2 Fast, 2 Ghey)

W

-front bumper fitment--coulda been worse...it now actually lines up fine.

-graphics... i thought you hated verbal diahrea:'(

wheels--19.2 lbs for an 18" isnt bad at all home slice.

[Makross]

looks nice

[RacingCivicSi02]

:D :D looks good. the drop looks sexy :p :p

[Will2K2]

Originally posted by REVwheels



-graphics... i thought you hated verbal diahrea:'(

wheels--19.2 lbs for an 18" isnt bad at all home slice.

Listen Sausage Pants, everyone has their opinion just expressing mine!

As long as thats okay with you, cheesdick?

Let us know what kinda #'s

W

[REVwheels]

dynoing tonite to make sure everything is ok ...then tomorrow we are gonna try a couple diff. turbo's to see what the car can do.

[Impact23]

*DEAD* :eek:
Good lookin ride so far.... the rims are not my thing but they dont look bad since it is a promotional car.

[Mugen_EP]

This is an informative thread.

Lets not have to lock it down. Keep it friendly.

BTW nice. Even though I dont like graphics I can see the advertising needs and can respect the turbo.

[2k2civicSi]

car looks great!! tastfully done shop car

[02TafWhtSi]

any pics standing still?

[2k2_nbp_egg]

Originally posted by ssvr6


I'm running a 2.25 midpipe and stock exhaust for the ultimate sleeper look. I'm also planning on anodizing the FMIC black to make it really low key.


Steve

Lol, something about this guy's car tells me he isn't really going for the stealth approach....

I'd probably hit up at least a 2.5"-2.75" midpipe depending on much I was boosting....but since you look like you've gone all out I'd just flat out buy an aftermarket turboback exhaust system. Get some volks for the track too :) My only complain about turbo 4 cylinders is that they all sound like raspy pieces of shit with the exception of the boxer engines which for some reason sound somewhat like domestics.

Anyway.....fucking nice ass car man :)

[dustinhurley]

what kind of wheels are those, and do you have any still pics of them?

[Mugen_EP]

Originally posted by dustinhurley
what kind of wheels are those, and do you have any still pics of them?

View his members ride thread

http://ephatch.com/forum/showthread.php?s=&threadid=13954

[Suk02Si]

If it was a teaser there would only be one pic, a blurry one;) :D


BTW, Car looks good. Dont forget to post dyno #'s;)

[ssvr6]

Originally posted by 2k2_nbp_egg

My only complain about turbo 4 cylinders is that they all sound like raspy pieces of shit with the exception of the boxer engines which for some reason sound somewhat like domestics.


Then you need to hear my car. It doesn't sound like that at all.


Steve

[2k2_nbp_egg]

Originally posted by ssvr6


Then you need to hear my car. It doesn't sound like that at all.


Steve

Oh shit....well then it looks like you're overdue for some sound clips and videos :)

Have you replaced your clutch yet? Cause you're also overdue for some more dyno / 1/4 track runs too

[1320_si]

REV on your front bumper where you put the stock grill back in was there a gap between the kit and the grill? I have the same kit and there was on mine just seein how you fixxed that. How was the fitment of the IC in the Kit as I am getting a turbo in the next couple of weeks. Also do you have any pics of the back of the Kit?~AJ

[abstrack]

*drool*:p

i would like to ask your car out on a date.. is that ok...:D ;)

[ssvr6]

Originally posted by 2k2_nbp_egg


Oh shit....well then it looks like you're overdue for some sound clips and videos :)

Have you replaced your clutch yet? Cause you're also overdue for some more dyno / 1/4 track runs too

The clutch is next on my list. I *should* be getting some video of me at the track next wednesday if all goes well. I'm heading to Cybernation tomorrow for a follow up visit and such.

Steve

[dustinhurley]

Originally posted by Mugen_EP


View his members ride thread

http://ephatch.com/forum/showthread.php?s=&threadid=13954

I did that, but there it says 17", this thread says 18". So, I figured they were different wheels. Are they?

[Keyser_Soze]

Nice car man it look tight and i like the advertisement on the sides (it looks tight as a matter of fact i think).....My personal opinion i think Will is just a tad bit jealous his car doesnt look as good and isnt turbo???Could it be?!?!:D :D

[REVwheels]

Originally posted by 1320_si
REV on your front bumper where you put the stock grill back in was there a gap between the kit and the grill? I have the same kit and there was on mine just seein how you fixxed that. How was the fitment of the IC in the Kit as I am getting a turbo in the next couple of weeks. Also do you have any pics of the back of the Kit?~AJ

stock grill fits back in the bc3 bumper with minor modifications. the holes are actually predrilled on the kit i got. the intercooler im using is HUGE. its about the same size as a skyline core. fitment is fine being that to get the front bumper to fit we had to remove the front bumper suipport. so with all that extra room the piping and intercooler had no probs with fitment. i dont have any recent still pics. i havent had the car all week....and its not worth taking any pics of the car while its all apart. i will have full specs on the turbo kit later today as we will be tuning and testing diff. turbo's on the car. though i dont have all the specs on the kit...i can say that is being built by south florida performance(SFP). as for my rims...currently im on 18x7.5 (19.2lbs) REV model II in the hypersilver finish.

[2k2_nbp_egg]

18 x 7.5......damn what kinda tires / how wide?

I eagerly await your turbo kit specs and numbers :)

[STP03BlueSI]

NICE CAR!!!! thank god i am at work i have 56k at home!:) :D

[REVwheels]

Originally posted by 2k2_nbp_egg
18 x 7.5......damn what kinda tires / how wide?

I eagerly await your turbo kit specs and numbers :)

Im on 215-35-18 BF-Goodrich KDW's. ride is awesome, tires are to date...some of the best tires ive ever. im putting on my 19's monday..so that should be plenty of fun.

...and i too can not wait for the dyno results later. i prob wont be able to post the numbers till either tomorrow or monday though.

[REVwheels]

Originally posted by 2k2_nbp_egg
18 x 7.5......damn what kinda tires / how wide?

I eagerly await your turbo kit specs and numbers :)

Im on 215-35-18 BF-Goodrich KDW's. ride is awesome, tires are to date...some of the best tires ive ever. im putting on my 19's monday..so that should be plenty of fun.

...and i too can not wait for the dyno results later. i prob wont be able to post the numbers till either tomorrow or monday though.

[team ERA 5]

omg REVSPEED ..... you should be RIDE OF THE MONTH......ur also my new wallpaper...sorry mugenep (tony) gotta update hahaha

[BarracksSi]

Originally posted by ssvr6
...I'm also planning on anodizing the FMIC black to make it really low key.


Steve


I take it the anodizing won't affect the cooling at all?

Oh yeah -- REVspeed, fuckin' cool.. lol

(waiting patiently for my warranty to run out)

[2k2_nbp_egg]

LOL holy shit...replacing the 18s....with 19s!!!

Goddamn man, you gonna have track rims? Like some featherweight 14s w/ slicks or rotas or something? Cause after you get those 19s you can kiss a sub 2.5 60' along with a good time goodbye lol. Still tho....once again you get my props :)

[REVwheels]

well once the audio stuff phoenix gold sent me goes in...kiss everything goodbye...this is why i wanna get some time slips and street time on the car before they add another 1000 lbs to the car.

[ssvr6]

Originally posted by BarracksSi



I take it the anodizing won't affect the cooling at all?


Not at all, that's why I was considering it. Now I'm just going to order that lower race grill to hide it.


Steve

[golferjn]

nice car