Stock Header from RSX (not Type S) helps?

[02SilverSiHB]

I sall this post on clubsi and one guy was talking about a guy who hit a 14.7 with this setup...
skunk2 coils
custom cold air intake piping and k&n filter
RSX(not type S) header
Custom 2.5" exhaust
"spoom" wheels with drag radials
If that's true, I'm very interested.
here's the link: http://forums.clubsi.com/showflat.php?Cat=&Board=UBB1&Number=1107168&page=0&view=collapsed&sb=5&o=0&fpart=2&vc=1&PHPSESSID=

onefastdx made the reply I'm talking about

[xlr8]

its probably the hp header for the base rsx. we have the same motor im sure the exhaust manifolds cant be that different

[02blksi]

nice time, if he really ran that! --joe

[2fastcivic]

so when did skunk2 coilovers come out? i called in two days ago and they were still testing it.

[02SilverSiHB]

Originally posted by 2fastcivic
so when did skunk2 coilovers come out? i called in two days ago and they were still testing it.
he could probably have bought the ones for a 2001-02 civic ex.

[2fastcivic]

i dont think it would fit b/c ground controls wouldnt fit.

[02SilverSiHB]

Originally posted by 2fastcivic
i dont think it would fit b/c ground controls wouldnt fit.
strange I wonder why. My progress springs from a 01 ex fit. Maybe the set up for coilovers is completely different all together. Besides, you'll want a higher spring rate than what 01 ex springs have

[JSIR]

stock RSX header is the same as our stock header, he may be referring to an aftermarket RSX header such as HP. Interesting post though, especially on Clubsi.

[2fastcivic]

i would want to see a time slip though. that time looks to good to be true w/ the kind of mods he got.

02SilverSiHB: i do want a higher spring rate. thats why im waiting for skunk2 to come out w/ there coilovers b/c their spring rates should be higher than ground controls. anyone knows when skunk is suppose to release their coilovers?