PDA

View Full Version : HELP!! taking off 90degree bolts along the frame inside the dash



jcivic
08-03-2003, 01:19 PM
hey,

i need some help/advice on how to take of the 90degree bolts along the frame inside the dash

and also what tool to use b/c its a really tight space

any help would be appreciated

thanks

jaydub
08-03-2003, 02:17 PM
Use a long screwdriver. If you will take the fuse panel cover off on the driver's side, you can reach that one by sliding the screwdriver through that opening and toward the screws. For the other side, you will see that the brackets which hold the glovebox up are removable from inside the glovebox. They come off pretty easily, and then the glovebox will fall toward the floorboard. You can then access that side thru the glovebox opening.

It's easier than trying to get a socket in there. I can now remove the entire dash assembly in less than 5 minutes.

jcivic
08-03-2003, 02:24 PM
thanks alot..i'll try this out