Ephatch
>
Tune-Up
>
Engine
> 2.5" Inlet muffler
PDA
View Full Version :
2.5" Inlet muffler
TrippZ
08-10-2003, 12:54 PM
okay, if you have a muffler with a 2.5" inlet, is it possible to weld it onto a 2.25" midpipe, despite the obvious .25" gap?
ADAMnQuickCIVIC
08-10-2003, 01:31 PM
yes, they just use a 2.5" to 2.25" coupler pipe.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.