SPC Camber kit part numbers?

[ep3guy]

Can someone please give me the part number to their SPC camber kits? For some reason I can't find the part numbers anywhere. Also will the camber kit for the 01-03 Civics Coupes/Sedans fit the 02-03 Civic Si's too?

Thanks.

[Civicvtec1ps]

67230 for rear
81280 - 16mm

01-03 civic's front camber bolts are 14mm. but ours is 16mm just like rsx.
rear camber kit works on rsx,si,01-03 civics

[Jedo]

Originally posted by Civicvtec1ps
67230 for rear
81280 - 16mm

01-03 civic's front camber bolts are 14mm. but ours is 16mm just like rsx.
rear camber kit works on rsx,si,01-03 civics


03 coupes are 16mm too...

[ep3guy]

Originally posted by Jedo



03 coupes are 16mm too...

Can anyone confirm this?

I need to get a kit for my cousin also and he has an 03 Coupe.

[Jedo]

Originally posted by ep3guy


Can anyone confirm this?

I need to get a kit for my cousin also and he has an 03 Coupe.

look at illustration 12 of this site (http://www.hondaautomotiveparts.com/auto/jsp/mws/prddisplay.jsp?inputstate=5&catcgry1=Civic&catcgry2=2003&catcgry3=2DR+EX+SIDE+SRS&catcgry4=KA4AT&catcgry5=FRONT+SHOCK+ABSORBER). the 2003 ex coupe uses 16mm bolts. i also found this out when i installed my kw coilover. the 2 oem bolts are slightly bigger than the 2001-2002 and it won't fit on my coilover. you may also want to confirm this with anybody on what size the front camber kit for your cousin's 03 coupe you should get.

[ep3guy]

Thanks a lot for all the info! :D

[chunky]

have you actually used the 16mm bolts in the ep3?

I have the 14mm bolts in, and I'm not so sure that the 16mm eccentrics would fit.

The bolt has to be a little smaller to allow for the camber adjustment. So if the stock bolt is 16mm, the aftermarket one should be a little smaller.

[ep3guy]

Originally posted by chunky
have you actually used the 16mm bolts in the ep3?

I have the 14mm bolts in, and I'm not so sure that the 16mm eccentrics would fit.

The bolt has to be a little smaller to allow for the camber adjustment. So if the stock bolt is 16mm, the aftermarket one should be a little smaller.

I have checked the parts listing on the Honda sites and the older Civics were using 14mm bolts while the 03 Civic was using a 16mm. Our Si is using a 16mm bolt. I guess either way it's fine? I'm not so sure, I just wanted the correct bolt.

I'm pretty sure if you go to Honda for the camber bolt, it would be a 16mm bolt. Anyone know for sure?

[chunky]

Originally posted by ep3guy


I have checked the parts listing on the Honda sites and the older Civics were using 14mm bolts while the 03 Civic was using a 16mm. Our Si is using a 16mm bolt. I guess either way it's fine? I'm not so sure, I just wanted the correct bolt.

I'm pretty sure if you go to Honda for the camber bolt, it would be a 16mm bolt. Anyone know for sure?

from what i've read, the camber correction bolt that honda uses is a smaller bolt. B/c you have to get a new nut to go with it, the stock 16mm nut doesn't work anymore.

[Jedo]

what will happen if i will use a 14mm bolt instead of the 16mm? i don't mean the camber, i'm refering to the two bolts? would that be bad for your car? info pls. thanks.