PDA

View Full Version : Two questions, Mugen and stock suspension


trabadoo22
08-13-2003, 02:47 PM
I am interested in the Mugen sport coilovers, but I'm unsure of their spring rates. I've seen different people posting 433f/682r and others 283f/439r. So I'm just wondering which one is correct.

Now my second question. Does anyone know what the stock suspension material is? Reason I am asking is I've seen the KW coilovers and some part in their setup is stainless steel. But I'm just curious if the same part in our stock suspension is as well. Thanks alot.
Silvershadow
08-13-2003, 09:55 PM
No 2 second question.
trabadoo22
08-13-2003, 11:01 PM
Man I'm tired. I initially read your post wrong, but I understand now. Thanks.
Silvershadow
08-14-2003, 01:22 AM
283&439 are correct.Confirmed @ Kingmotorsports.
Gasp23
08-14-2003, 07:48 AM
Thanks for the info guys
Burgh
08-14-2003, 08:21 AM
Originally posted by Silvershadow
283&439 are correct.Confirmed @ Kingmotorsports.

That's pretty much the same as stock (which is 248f/440r). :(
02SilverSiHB
08-14-2003, 08:27 AM
Originally posted by Burgh


That's pretty much the same as stock (which is 248f/440r). :(
I'm sure the shocks are higher performance though...I hope!
trabadoo22
08-15-2003, 02:42 PM
Ya, me too. I imagine they are though. When I think about it though alot of people like the Tein springs which have a much lower spring rate than stock. It seems that the stock spring rates are fairly stiff as it is. With the addition of better shocks and a lower stance I think it would be a good performance upgrade. Thanks again for the info.