Gauge Pod?

[D16Y8_Turbo]

Anyone know of a gauge pod that is built for our rides? I'm trying to figure out where I'm going to put the boost and EGT gauges and was hoping someone knew of a company that was making them. I've looked at Autometer already and didn't see the Si listed. You help is appreciated :)

[vtecnrg]

I am in the same boat. I came across this thread searching for where to buy a pillar pod. Anyone have one?

[RockEP_SS**]

Yeeeep, same here. No pods out yet, so I just put my boost gauge in that extra hole next to the shifter. It came out pretty clean.

Rocky
Showstoppers USA

[vtecnrg]

Originally posted by RockEP_SS**
Yeeeep, same here. No pods out yet, so I just put my boost gauge in that extra hole next to the shifter. It came out pretty clean.

Rocky
Showstoppers USA

Do you have any pics? I need to do something until the aftermarket world catches up.

[JackHerer]

i have a 3 pod on my sir, you have to contact ultimate racing becuzz they got it for me.

[Mugen_EP]

There was a Triple gauge pod for the pillar on Ebay. Try e-mailing the seller about more.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2950061381&category=20947

[vtecnrg]

Originally posted by Mugen_EP
There was a Triple gauge pod for the pillar on Ebay. Try e-mailing the seller about more.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2950061381&category=20947

Thank you for the lead. I sent him an email. I will post with the information that I found out.

[SiR_d1]

Originally posted by vtecnrg


Thank you for the lead. I sent him an email. I will post with the information that I found out.

Please do so.
I posted a similar forum but no one responded:(

[SiR_d1]

Originally posted by JackHerer
i have a 3 pod on my sir, you have to contact ultimate racing becuzz they got it for me.

how much was the pod? did you buy the gauges from them also? and how much where they also??

Sorry for all the questions but I want to get this done ASAP while I still have the money for it

[GP Si]

I just got a full pillar for mine but its for the regular coupe so i had to cut about 1.5 inches of it to put it on but it went on perfectly after that

[vtecnrg]

My gauge pod is on the way. I should have it by Friday. I will post some pics when it arrives. The person said if we were interested he could set up a group buy for us all. I can't wait. :D

[vtecnrg]

BTW, I forgot to ask if anyone knows where to get a good deal on some Auto Meter Colbalt gauges. My turbo kit should also be here by Friday.

[xlr8]

Originally posted by vtecnrg
My gauge pod is on the way. I should have it by Friday. I will post some pics when it arrives. The person said if we were interested he could set up a group buy for us all. I can't wait. :D
once you get it and check the fitment, let me know i need a pod

[vtecnrg]

I did not get the pillar pod. Turns out there was some miscommunication and I ended up asking for a refund.
Sorry guys. But I'm still searching.

[HighRev-thug]

Originally posted by vtecnrg
I did not get the pillar pod. Turns out there was some miscommunication and I ended up asking for a refund.
Sorry guys. But I'm still searching.


Sorry it didnt work out!! i only had one! and there was a auction item! Had to send to the Winning bidder first.

If anyone else will like to try these pod Let me know i been waiting long time to get some pictures!




HEre some pictures installed on EVO8, tiburon 2003 and 2002 rsx just so you guys can see and compared to those so call Full pillar pods or whatever your local shop trying to dupe you into buying some that not made to fit 100% your Si.

http://www.scadesigns.com/images/evo3

http://www.scadesigns.com/images/lancer.JPG

http://www.scadesigns.com/images/tibby03-04.JPG

http://www.scadesigns.com/images/rsxtripod.JPG

http://scadesigns.com/Pods/Crx88-91_Ins.JPG

[EPHatchgirl]

Hey guys. I am using carbon fiber gauge cups for my gauges. They fit really nice, and they are universal, they just mount onto your a-pillar. Let me know if anyone wants pics.

[kcx23]

does anyone know about the triple pod that sits on top of the dash board, kinda like the wrx, but in universal form? thanks KC

[sniperSI]

What are those gauges that mount on your windshield, they just stick right on that glass, i love it, real clean anyone anyone?

[kcx23]

its made by blitz!

[vtecnrg]

Originally posted by EPHatchgirl
Hey guys. I am using carbon fiber gauge cups for my gauges. They fit really nice, and they are universal, they just mount onto your a-pillar. Let me know if anyone wants pics.

I would like to see some pictures.

[pimp02]

i put boost gauge where hazard went and just taped hazard and tucked it behind i'll either make another hole for it or just leave it back there,and use flares if i need to then i put richness gauge in blank hole.and i'll relocate power outlet put c/n apexi there.heres a pic if it works, i'm a little rusty.http://www.juneaudominos.com/jonny/image001.jpg

[vtecnrg]

Looks great. I saw this picture or another like it in a different thread. This is the gauge install that I have chosen for my EP. As we speak the shop is installing the gauges in the exact same places. I purchased the Auto Meter Colbalt gauges. I put my air fuel on the drivers side and my oil on the passenger side. I requested they install the boost gauge up by the instrument cluster. I also asked it was possible to relocate the emergency blinkers to the blank plug just to the right of the steering column. I will post pictures when I get my car back.

[SiR_d1]

can't wait to see them

[pimp02]

Originally posted by vtecnrg
Looks great. I saw this picture or another like it in a different thread. This is the gauge install that I have chosen for my EP. As we speak the shop is installing the gauges in the exact same places. I purchased the Auto Meter Colbalt gauges. I put my air fuel on the drivers side and my oil on the passenger side. I requested they install the boost gauge up by the instrument cluster. I also asked it was possible to relocate the emergency blinkers to the blank plug just to the right of the steering column. I will post pictures when I get my car back. you might tell them to angle the oil gauge toward drivers seat,if its flush just a little of it's not visible for driver.

[vtecnrg]

The gauges turned out sweet. The colbalt blue looks very cool. I think the gauge on the passenger must be angled I can see it very well from the drivers seat. I also like where they installed the boost gauge on the steering column. I am so glad that I went this route versus a pillar pod, I think it looks so much better and custom. I was uncertain if I would love it 100% or not from the pics but after seeing it in person,it is very worth while. I would like to post some pictures, does anyone have instructions on how to do so? Do I just attach the picture file?

[ep3guy]

Originally posted by vtecnrg
The gauges turned out sweet. The colbalt blue looks very cool. I think the gauge on the passenger must be angled I can see it very well from the drivers seat. I also like where they installed the boost gauge on the steering column. I am so glad that I went this route versus a pillar pod, I think it looks so much better and custom. I was uncertain if I would love it 100% or not from the pics but after seeing it in person,it is very worth while. I would like to post some pictures, does anyone have instructions on how to do so? Do I just attach the picture file?

Yup. :)

[HighRev-thug]

If the picture to large it may not up load as fiel attachement you can email them to me ill upload them for you adn send you links or post them here!!!

scautodesign@aol.com

[SiR_d1]

post pics

[SiR_d1]

Originally posted by EPHatchgirl
Hey guys. I am using carbon fiber gauge cups for my gauges. They fit really nice, and they are universal, they just mount onto your a-pillar. Let me know if anyone wants pics.

I still want to see your pics too

[vtecnrg]

I will take and post pictures tonight.

[vtecnrg]

Here are the pics. The night pic is a little blury but you will get the idea.

[vtecnrg]

Pic #2 - I will try and make it even smaller.

[vtecnrg]

Pic # 3 - Colbalt Gauges at night. I think I am figuring this size thing out.

[vtecnrg]

Pic #4 - Last but not least the Boost Gauge

[TheMutt]

What kinda gauges are those? Very sexy, howd you get them in there like that?

[vtecnrg]

They are Auto Meter gauges. They are from the Colbalt series. I had seen another EP on this sight that had them installed in this manner and simply showed the pictures to my turbo installer and there you go. The one on the steering column is the boost and the other two are air fuel and oil. I really like the way they turned out it looks very custom. I was surprised at how much gauges cost.

[EPHatchgirl]

OK guys, I fell off the face of the earth, I know... I still have to hide the wires, but I have a pic of my carbon fiber cups..

(LOVE THE COLBALT GAUGES!! Those are Damn Sexy.)

[stimpGSX]

I have an autometer single pod on my SI. just get the one for the 02 civic. it fits fine. Ill post pics as soon as i get out of work tonite. i think i paid 18 bucs for it. the dual is $28

[SiR_d1]

So wait, autometer has pods for the ep now??
Post a pic I would love to see one

[stimpGSX]

Here is a pic of the pod. the part # for the pod is 20442

[K-Series]

Do they make a double?


Steve

[SiR_d1]

No way!!!!

When did Autometer come out with this? I e-mailed them couple months ago and they said said that probably next summer they would come out with the gauge pod for the EP3.

Just to confirm this is the pod for the 02 CIVIC SI(R) not just a regular 02 Civic right?

Also in regarding to Steve's question, do you know the part # for the dual pod?

Anthony

[SiR_d1]

Originally posted by SiR_d1
No way!!!!

When did Autometer come out with this? I e-mailed them couple months ago and they said said that probably next summer they would come out with the gauge pod for the EP3.

Just to confirm this is the pod for the 02 CIVIC SI(R) not just a regular 02 Civic right?

Also in regarding to Steve's question, do you know the part # for the dual pod?

Anthony

I just checked Autometer's website. The po dyou have is just for the regular civic:(

But yours still looks nice though. Did you gave to modify anything for it to fit? and did you paint it to match the interior or did it come like that.

I debated to get that one a while ago but I know people here have got the dual pod for the civic and they said they had to modify it to fit.

[stimpGSX]

The part # is for the regular civic but it fits the si perfectly so no mods needed and yes they do have a dual pod. dont know the part #. the pod comes in black so you will have to paint it like i did.

[SiR_d1]

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33675&item=2443281797


Here's a listing I found on ebay. Part #20441

[K-Series]

Thanks, I'm getting it.

Quick question, what did you use to paint it and what color?


Steve

[SiR_d1]

Hey Steve,

when you do get it can you just confirm exactly how perfect the fit is? I am going to be deciding on whether to get it based on your findings.

I just want to be absolutely sure its a perfect fit before I buy because most likely I'll be asking my gf to buy me it along with some gauges for christmas

Thanks
Anthony

[K-Series]

Will do!


Steve

[SiR_d1]

I just checked ebay:D

way da go Steve, only 4 hours to go and the pod's yours!!

[stimpGSX]

The color i used to paint the pod is called Federal gray(plasticoat). its a perfect match. I went to my local autoparts store with the pilar and matched it.

[K-Series]

Sweet! Thanks GSX!


Steve

[SiR_d1]

Steve did you get the pod yet??

How's the fit?

Anthony

[02SilverSiHB]

Originally posted by vtecnrg
They are Auto Meter gauges. They are from the Colbalt series. I had seen another EP on this sight that had them installed in this manner and simply showed the pictures to my turbo installer and there you go. The one on the steering column is the boost and the other two are air fuel and oil. I really like the way they turned out it looks very custom. I was surprised at how much gauges cost.
yeah, they look great man! nice job!

[K-Series]

Got the pod but haven't had time to install it with the holiday and family in town.

Hopefully this weekend.


Steve

[esmith13]

I think the Autometer Cups look better than the pod add-on. It would be one thing if it was a full pillar replacement, but the add-on just dosen't look right to me. Besides, the cups have that "tuner" look to them. I'm very happy with mine.

Eric

[SiR_d1]

post pics ou have them

[esmith13]

These pics blow, but their what I have right now.. I can take better ones if you want.

http://65.168.247.56/ephatch/guagecups/front.jpg

http://65.168.247.56/ephatch/guagecups/side.jpg

Eric

[ep3guy]

Here's mine.

http://www.imagestation.com/picture/sraid91/p79b43509629ec14fe29eda5367c5c3cb/fa63c664.jpg

[SiR_d1]

ep3guy

can you post a pic of where your hazard button is now. I was think about doing the same this but I don't know how it looks to place the hazard somewhere else

[esmith13]

ep3guy,

Can you honestly see those guages while driving?? I'm just curious. Part of the fun of the CN Turbo is tuning on the fly yourself, so I need to see my guages WHILE driving. I'm sure that's not really a concer for you, but I may move my guages there if you think their easy to see... I have a feeling their not tho...

And yeah -- where IS your hazard button now???

Thanks for postin that pic - the install is CLEAN AS HELL!

Eric

[ep3guy]

I can read my boost gauge easily. I can't really see the Air/Fuel gauge clearly since the shifter gets in the way and it blocks the view of the gauge. This is the reason why I had my boost gauge on the left. Tuning on the fly with the Autometer air/fuel is kinda iffy because it is not accurate. Honestly, I don't really care for the air/fuel gauge because it's just a light show to me, nothing else lol. I wanna get an EGT gauge, but those are $$$$$$$.

As for my hazard, it's under the steering wheel kinda. I just moved the hazard button down there so if I ever need to use it, I just reach down and press it.

[Civicvtec1ps]

here you go..
http://ephatch.com/forum/showthread.php?s=&threadid=21411
I posted while ago but no one really checked. oh well.
http://www.imagestation.com/picture/sraid81/p388f0d8d68493a285d8d74556e3da8b1/fafd647f.jpg
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMTgzNTMwNnM0MTNkZmQzMXk1NDE%3D
I have autometer ultra lite series. Which matches stock interior color perfectly. I thought about cobalt series but that wouldnt match interior lighting. unless if i had time to do DIY led interior lights.

[K-Series]

Ok, I test fitted the pod that I got off of Ebay. The top (front) portion is an exact fit. The bottom (close to the dash) leaves a little gap. It's barely noticeable. I tried to take some pics, but they suck since I was holding it. I'll upload them this evening. I'll also be prepping and painting it this week as well.



Steve

[SiR_d1]

thanks Steve.

Yeah post your pics if you can I wanna see this gap and how noticeable it is

[K-Series]

I have no pics of the gap at all. I couldn't get it with my hand in the way. I'll have to paint it and install first I guess.


Steve

[SiR_d1]

you how with your old pod there was a big gap with the first pod facing you, are you saying with the new one its sits flush?

[K-Series]

Yes, completely flush. It's the part at the other end of the pod that doesn't. There's a slight lip in the mold that's not on our pillar.

You have to reach around to feel it though. If you stare at it, you can see that there's a protrusion, but it's no biggie by my standards.


Steve

[SiR_d1]

I dont know what protrusion means?:D

[SiR_d1]

Originally posted by US_Si


You have to reach around to feel it though. If you stare at it, you can see that there's a protrusion, but it's no biggie by my standards.




are you talking about the pod and how it looks on the pillar or the actual pod itself?

[K-Series]

Let me post pics of the pod by itself and on the pillar so I can explain. I'll do this around 6pm EST.

:)



protrusion

\Pro*tru"sion\, n. 1. The act of protruding or thrusting forward, or beyond the usual limit.

2. The state of being protruded, or thrust forward.

n 1: something that protrudes [syn: bulge, bump, hump, gibbosity, gibbousness, jut, prominence, protuberance, extrusion, excrescence] 2: the act of projecting out from something [syn: projection, jut, jutting]



Steve

[SiR_d1]

thanks Steve

[stimpGSX]

what up,


glad to see you got the pod, can t wait to see how it looks on.



Luis

[K-Series]

Both pics suck....sorry.

[K-Series]

The gap wil be removed once it's attached firmly.

[STP03BlueSI]

damn that looks good steve

[SiR_d1]

where is it protruding?

[SiR_d1]

Steve any pics of the final product?

[n8dawgsmu]

i noticed that the RSX has a steering column mount made by autometer, any chance they will be making one for our car... im guessing it wouldn't majically fit.

[SiR_d1]

maybe one day;)