EVO exhaust on and other stuff.

[bioevolve]

First is a comparison of the EVO and the exhaust I made when I was working at a muffler shop.
http://www.imagestation.com/picture/sraid80/pf64f90967de301e644faa292346114c9/fb0b8c40.jpg
http://www.imagestation.com/picture/sraid80/p45b6dec341dcff5f7ec39653cd64e230/fb0b8db3.jpg
http://www.imagestation.com/picture/sraid80/p89b46cc7c49af77470d4a20e059080eb/fb0b8d6b.jpg
http://www.imagestation.com/picture/sraid80/p820c2ec5fc02f5876e64f02d8c485207/fb0b8d2c.jpg
http://www.imagestation.com/picture/sraid80/p4259ebaf5bb2a5fcf14ab2fd1b157f82/fb0b8ce7.jpg
Resonated Tip.
http://www.imagestation.com/picture/sraid80/p37ee368e4e4a661974b9fce8fc8e8a38/fb0b8c7a.jpg
Cut it here so if anyone wants to buy my old exhaust, just have a muffler shop weld a 2.5" coupler here.
http://www.imagestation.com/picture/sraid80/pa5ced6c36e9ba4af8e98d62079107f9a/fb0b8c9c.jpg

[bioevolve]

Had to do some adjustments around the rear sway bar.
Bent these to lift it.
http://www.imagestation.com/picture/sraid80/p357e86a96527ddbc29bcfae768c7a157/fb0b8f73.jpg
http://www.imagestation.com/picture/sraid80/p9f8ef885de94ab5b7acf058852f50a5a/fb0b8f55.jpg
Before: No Clearance
http://www.imagestation.com/picture/sraid80/pe743ac3ea79d75b3944b8da4f2a80f1b/fb0b8f8e.jpg
After:Just enough to clear it, push and pull tested.
http://www.imagestation.com/picture/sraid80/p94bb06784524623b936d83e5be5ba9c8/fb0b8f33.jpg
Alittle rusty
http://www.imagestation.com/picture/sraid80/p211d5a8400fe4b2d98dd11b35f0b8175/fb0b8ec3.jpg
Wire brush on drill cleaned it up
http://www.imagestation.com/picture/sraid80/p504e015028f968b188849d96737df291/fb0b8fad.jpg

[bioevolve]

Finished product
http://www.imagestation.com/picture/sraid80/pca3a612a1d9bccdb68eefbeb96cac84c/fb0b8f0c.jpg
http://www.imagestation.com/picture/sraid80/p0ff66fe2d7bb54902f61c452d44c7fc1/fb0b8ef0.jpg
Center section hangs alittle low, expected from EVO
http://www.imagestation.com/picture/sraid80/p7bef57c5ede4abe7064d69a5a697c9c6/fb0b8e4e.jpg
http://www.imagestation.com/picture/sraid80/p8d9eb45c39778fd8dd8718b2dd081442/fb0b8e27.jpg
http://www.imagestation.com/picture/sraid80/p131b6f5a0c51e8cbf366192b546e36d1/fb0b8e6d.jpg
http://www.imagestation.com/picture/sraid80/p5f5c9d9fba829e0cbd3203ef8193a472/fb0b8e0b.jpg
Took the old lugs off and put new ones on
http://www.imagestation.com/picture/sraid80/pafd2ac683ad6260936b773dd9624fa2c/fb0b8a96.jpg

[bioevolve]

Put the SS clutch cable on
http://www.imagestation.com/picture/sraid80/pa41377e81e6ff56c06e399f94efd631b/fb0b8a77.jpg
Also got the Grounding kit on
http://www.imagestation.com/picture/sraid80/p6d2ce378c26dbf7afdeca3a46eabe0ba/fb0b8ac2.jpg
http://www.imagestation.com/picture/sraid80/p679e4a0f60937f27d242a3c253730fcd/fb0b8bd5.jpg
http://www.imagestation.com/picture/sraid80/p487c94a1c3d81e102bf99ee1d56b30c4/fb0b8bf3.jpg
http://www.imagestation.com/picture/sraid80/p4c38864fc4e816e52aab57d33187ff35/fb0b8baf.jpg
http://www.imagestation.com/picture/sraid80/pd4eb93ac15ac74d37404bacad8a5e36b/fb0b8b84.jpg
http://www.imagestation.com/picture/sraid80/p2522566b52fe3f2688bfcff7e38d5913/fb0b8b54.jpg
http://www.imagestation.com/picture/sraid80/p8e01485a5371d2335eb41f506175ac8d/fb0b8b18.jpg
http://www.imagestation.com/picture/sraid80/p2cc318c645341fce67dcc1c9b120d9b2/fb0b8aec.jpg

[bioevolve]

The EVO Exhaust is super quiet compared to my old exhaust lol. It sound like I have a stock on again :p I haven't got on it yet, heck haven't left the house yet. Over all the EVO is great, with minor adjustments. EVO is about 13lbs heavier than the old exhaust, but the EVO is mandrel bent (better flow). With it's 60mm to 70mm design, it will be great for the turbo setup in the future. I like it alot!

[Civicvtec1ps]

i dig it. piping looks awesome.
:D

[brendanSI]

where did you buy the stainless clutch line?

and did you make the grounding kit or order it from somewhere?

EVO looks great... give an update on all three if you dont mind :)

thanks

[bioevolve]

SS clutch cable, I got it from a guy on k - series . com $32 shipped
Just post there and he will find you.

Grounding kit from an ebayer motoraz03 $24.95 (buynow) plus shipping.
Even thou they are not gold plated ends, still tested 0hms resistance. ;)

Test drove to the grocery store tonight, with it being so quiet, it feels like I have lost power. I guess no high rumbling sounds and no exhaust vibrations from sound make it feel like less power. Maybe it's just me, gotta get use to it I guess.

[ATRIOT]

Did you buy the battery terminal connector separately? it looks pretty nice, where can i get one?

[bioevolve]

Originally posted by ATRIOT
Did you buy the battery terminal connector separately? it looks pretty nice, where can i get one?

Came with grounding kit, also comes with a circular plate like the HKS. I just chose the triangle plates, cuz I didn't have but 5 wires going to the batter terminal. The circular plate holds something like 20 or more wires ends.

[ep pilot]

I like your Greddy Evo.... It looks nice...the tip is a little large for my taste, IMO.

-Ryan

[MrCivic03]

does the greddy sound nice. i want to see diff in the hks and greddy all i have heard is great things from both. evo=ground clearance issues
hks=bent at tip body kit issues.

[RacingCivicSi02]

For those who have greddy. is your tip turning bronze?

[RacingCivicSi02]

be careful on hills, steep highways, speed bumps, and etc.. http://www.digitalpose.com/mbr/1/17929/p/488708_4701435959480516294_vl.jpg
http://www.digitalpose.com/mbr/1/17929/p/488709_4987499453260713128_vl.jpg
http://www.digitalpose.com/mbr/1/17929/p/488710_935585697459363603_vl.jpg
http://www.digitalpose.com/mbr/1/17929/p/488711_7165771390784033134_vl.jpg
http://www.digitalpose.com/mbr/1/17929/p/488712_909999217981104102_vl.jpg
http://www.digitalpose.com/mbr/1/17929/p/488713_684481101330399999_vl.jpg
http://www.digitalpose.com/mbr/1/17929/p/488714_7855213212130888745_vl.jpg

[MrCivic03]

so how does the evo sound. when u rev is it deep and powerful sounding or is it low and not loud at all.

[TrippZ]

what the fuck happened?

[RacingCivicSi02]

Originally posted by TrippZ
what the fuck happened?
Greddy midpipe hangs to low.
my car is super low. and theres like long driveway which are steep too. and the some speed bump are higher then you would expect. there no other way to get around.

[civic-si 2003]

those pics of his evo looks just like mine and i only have like a 2 1/2 inch drop it sucks i called greddy and told them about it they said to get some custom mid pipe hangers and weld them on to the body and mid pipe.