View Full Version : I need rear seat help.
bmx269
09-24-2003, 07:27 PM
I removed my rear seats for weight while racing, now, I am going on a road trip and was reinstalling my seats and panels when I got stuck at the pivot between the two folding seats. I do not remember how the bolt / washer combo goes together and I need help. Can anyone help me ASAP. Maybe take a picture of the bolt for me with all the washers in place. Arrg I feel like a dumbass. :) Mugen_EP or Suk02Si come on guys, help me. :)
ATRIOT
09-24-2003, 10:48 PM
Does this help? http://www.collegehillshonda.com/instructions/02si/cdchanger.pdf
Good Luck.:)
Mugen_EP
09-24-2003, 11:22 PM
Originally posted by bmx269
Mugen_EP or Suk02Si come on guys, help me. :)
Damn..I didnt see this till now. I feel bad.:( sorry Trent but hopefully the link that Atriot posted helped. If you still need a pic just lemme know.
Again, sorry. You should have called my cell...:'(
bmx269
09-25-2003, 04:16 PM
Here is a diagram of the hinge i need info on. Thanks ATRIOT for the pdf that I used the image from.
http://www.digitalgumball.com/hinge.gif
Mugen_EP
09-25-2003, 04:21 PM
I will be off work in 15 min and be home in 45 min. I will take pics for you then if someone has not already done it.
Mugen_EP
09-25-2003, 05:23 PM
OK it looks like this: Bolt][ rubber gromet][bracket][rubber gromet.
Here are the pics...hth.
http://www.digitalpose.com/mbr/1/25496/p/497847_6252022587915767781_vl.jpg
http://www.digitalpose.com/mbr/1/25496/p/497848_7612047569174775088_vl.jpg
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.