View Full Version : Pedal install suggestion
chubbychu
10-04-2003, 08:15 AM
anyone have any tips for installing pedals?
like....do's and dont's? i dont want to get halfway through and realized i messed up. The instructions are in japanese so...basically im screwed here are some pix
also they come with clip ons...but i might just get some screws and screw it in.
chubbychu
10-04-2003, 08:16 AM
there is a rubber backing so its solid black when you install it
chubbychu
10-04-2003, 08:17 AM
and last but not least...the rubber backing sticks up through the holes to keep traction
oogy-boogy
10-05-2003, 01:11 AM
Nice pedals!
I would definitely screw them in....Clips can be soooo dangerous.
If you have a dremel with a drill tip (or small drill) it shouldn't take you any more than 30 minutes.
2 quick tips:
- Buy stainless steel screws as they will not rust as quick.
- Put down some plastic / newspaper so you don't engulf your carpet/mats with metal shavings.
Good luck!:D
Civicvtec1ps
10-05-2003, 01:29 AM
dont use clip ones. they WILL slip evevntually. just buy little screws and drill it.
chubbychu
10-05-2003, 08:51 AM
is the metal really hard?
MrCivic03
10-10-2003, 05:00 PM
ya it is harded steel took me like 5 hours for the full drilling and screwwing in pedals. and my clutch is crooked but brake and gas a close and straight. just take ur time, and man it is some hard work.
Civicvtec1ps
10-10-2003, 05:11 PM
yea took me while to since my drill sucked . stupid cordless drill.
NO power =/
well got it done soe just take time when you do this. might require quite a big long time . patient. patient.;)
STP03BlueSI
10-14-2003, 10:20 AM
i bought a set of Sparco pedals for my girls car...now i want a set...maybe next month:sadm:
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.