View Full Version : Hooooo-Weee! JDM rear sway just in....
RockEP_SS**
10-14-2003, 03:33 PM
Yo! Anyone out there with a JDM CTR rear sway bar?? How much of a difference was it? Just got mine in and I should be installing mine manana cause I got plans today (Buy Matrix Reloaded, watch it, and sleep!). Any pointers or tips on the install would be great. Thanks!
Rocky :cool: :D
Showstoppers USA
Peking
10-14-2003, 03:48 PM
Sweet. And I wanted to say thanks, my springs came in along with the camber kit.
02SilverSiHB
10-14-2003, 04:08 PM
I have a comptech combo one, basically the same, except the jdm one doesn't have a rear tie bar with it. Basically two bolts for the brackets..for the endlinks, just use a 5mm allen wrench while loosening the nut.
RockEP_SS**
10-15-2003, 12:13 PM
Originally posted by Atlas1133
Sweet. And I wanted to say thanks, my springs came in along with the camber kit.
No problem!
RockEP_SS**
10-15-2003, 12:14 PM
Originally posted by 02SilverSiHB
I have a comptech combo one, basically the same, except the jdm one doesn't have a rear tie bar with it. Basically two bolts for the brackets..for the endlinks, just use a 5mm allen wrench while loosening the nut.
Nice! Thanks for the pointers!
Rocky
Showstoppers USA
HeelToePro
10-15-2003, 01:42 PM
Don't install it upside down.
raiyo
10-15-2003, 10:12 PM
Here's my tip on installing it
click me (http://www.ephatch.com/forum/showthread.php?s=&threadid=10661)
RockEP_SS**
10-16-2003, 11:52 AM
Originally posted by raiyo
Here's my tip on installing it
click me (http://www.ephatch.com/forum/showthread.php?s=&threadid=10661)
Thanks! Is it that easy to install it upside down??? I think it's pretty straight forward.
Rocky
Showstoppers USA
raiyo
10-16-2003, 07:48 PM
Originally posted by RockEP_SS**
Thanks! Is it that easy to install it upside down??? I think it's pretty straight forward.
Rocky
Showstoppers USA
the bar went straight in "the wrong way" without any diffculty. later found out it was wrong.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.