PDA

View Full Version : Hooooo-Weee! JDM rear sway just in....



RockEP_SS**
10-14-2003, 03:33 PM
Yo! Anyone out there with a JDM CTR rear sway bar?? How much of a difference was it? Just got mine in and I should be installing mine manana cause I got plans today (Buy Matrix Reloaded, watch it, and sleep!). Any pointers or tips on the install would be great. Thanks!


Rocky :cool: :D
Showstoppers USA

Peking
10-14-2003, 03:48 PM
Sweet. And I wanted to say thanks, my springs came in along with the camber kit.

02SilverSiHB
10-14-2003, 04:08 PM
I have a comptech combo one, basically the same, except the jdm one doesn't have a rear tie bar with it. Basically two bolts for the brackets..for the endlinks, just use a 5mm allen wrench while loosening the nut.

RockEP_SS**
10-15-2003, 12:13 PM
Originally posted by Atlas1133
Sweet. And I wanted to say thanks, my springs came in along with the camber kit.

No problem!

RockEP_SS**
10-15-2003, 12:14 PM
Originally posted by 02SilverSiHB
I have a comptech combo one, basically the same, except the jdm one doesn't have a rear tie bar with it. Basically two bolts for the brackets..for the endlinks, just use a 5mm allen wrench while loosening the nut.

Nice! Thanks for the pointers!

Rocky
Showstoppers USA

HeelToePro
10-15-2003, 01:42 PM
Don't install it upside down.

raiyo
10-15-2003, 10:12 PM
Here's my tip on installing it

click me (http://www.ephatch.com/forum/showthread.php?s=&threadid=10661)

RockEP_SS**
10-16-2003, 11:52 AM
Originally posted by raiyo
Here's my tip on installing it

click me (http://www.ephatch.com/forum/showthread.php?s=&threadid=10661)

Thanks! Is it that easy to install it upside down??? I think it's pretty straight forward.

Rocky
Showstoppers USA

raiyo
10-16-2003, 07:48 PM
Originally posted by RockEP_SS**
Thanks! Is it that easy to install it upside down??? I think it's pretty straight forward.

Rocky
Showstoppers USA

the bar went straight in "the wrong way" without any diffculty. later found out it was wrong.