BC Kit and ground protection !!*HELP*!!

[KingGreg86]

I was wondering if there is nething i could purchase(*or build myself*) the i could mount on the underside of the bc kit to protect it from rubbing on the ground and causing dmg? NE help would be awsome.............. oh and ne1 know of a bc'd ep with 15in slips(*pics*)?

[Brettnyt]

Hmmm... thats a good question... You should be able to build some sort of a rubber strip to fit nicely on the underside, but i dunno how much good that will do...

[BlackSi613nin]

u can buy or build a splitter on there... just a piece of plywood, or somethin that is the shape of ur bumper that u can attach, race cars have them for the same reason.. they make carbon fibre ones too if u wanna go all out(but i dont know hwy you would just to get it all scratched up)

[bioevolve]

What ever you put down there it will wear away or tear away. Best to do is raise the car, which is a down side.:(

[KingGreg86]

Thanks for the input....i was thinking a piece of metal of some sort.....kind of like a scratch plate. i dont know, ill think of something.

[beansbear]

just get yourself a set of 18" rims like me. i have no problems scraping even with an almost 3" drop.

[todaCspec]

Get a carbon fiber sheet and cut it to the bumper shape. Carbon splitters are good for the edges of the bumper, if you only go at angles when coming on to ramps. Best bet would be to get some 16"s slips, it'll raise very little w/o having much effect in appearance and very usable even on rough roads.

[KingGreg86]

definatly getting some 16 slips..... anyone have pics of a buddy club egg w/ 16(or 15)slips??

[tony speed]

where do you buy these 16"s slips?

[KingGreg86]

Rota Slipstreams (http://www.machiii.net/machiii/html/wheels/Rota_Slipstream.html)

this is where i will prolly get myne