rswbrixton
11-08-2003, 10:58 PM
After Mugen suspension , 22mm rear sway , Spoon lower tie-bar , the next bit of mod work was the ALEX C-Pillar bar . Fastened on the c pillars just behind and above the rear seat belt anchors . Required a small cut out in the interior panels ( 1 1/2 x 1 1/2 inches) to fix the bar ends to the seat belt anchor bolt.
This mod does indeed add more rigidity to the rear upper chassis . Combined with the 22mm sway and lower tie bar , this car is very very firmly planted . Feedback through the chassis is incredible . You are so aware of the mechanics and position of the car .
Another 2 thumbs up for this project .
Big thanks to William and Albert and company at Speedstar.ca
Next couple weeks will see the arival up ALEX front and rear strut bars .
This mod does indeed add more rigidity to the rear upper chassis . Combined with the 22mm sway and lower tie bar , this car is very very firmly planted . Feedback through the chassis is incredible . You are so aware of the mechanics and position of the car .
Another 2 thumbs up for this project .
Big thanks to William and Albert and company at Speedstar.ca
Next couple weeks will see the arival up ALEX front and rear strut bars .