Ocelaris
11-16-2003, 03:54 PM
I took the liberty of figuring out the size brake bleeder screw we need. M10x1.25 M10 describes the outside diameter of the thread and 1.25 describes the pitch of the thread. There is also a x1.0 (fine thread and x1.5 (coarse thread) but ours needs a x1.25 thread (medium I suppose)
Speed Bleeders are a one way check valve built into the brake bleeder screw so that you don't have to close and open the bleeder screw every time your partner hits/releases the brakes. Basically you can do it yourself without worrying about air going back into the line when you release the brake line.
http://www.speedbleeder.com/
They're 7$ a piece or you can get 303 stainless steel ones for 15$ a pop, plus 3$ per order for shipping/handling. I will be ordering mine shortly. I have no relation to the company or anything, I've just been looking for these for a long time, autozone doesn't carry our size, despite that they do carry the licensed "speed bleeder" screws, but the "HELP!" company doesn't make our M10x1.25 size :-(
http://www.speedbleeder.com/images/sbani.gif
http://www.speedbleeder.com/ALL_BLEEDERS.jpg
Again our part is:
SB10125 # M10 X 1.25 1.35, (32.44)
Speed Bleeders are a one way check valve built into the brake bleeder screw so that you don't have to close and open the bleeder screw every time your partner hits/releases the brakes. Basically you can do it yourself without worrying about air going back into the line when you release the brake line.
http://www.speedbleeder.com/
They're 7$ a piece or you can get 303 stainless steel ones for 15$ a pop, plus 3$ per order for shipping/handling. I will be ordering mine shortly. I have no relation to the company or anything, I've just been looking for these for a long time, autozone doesn't carry our size, despite that they do carry the licensed "speed bleeder" screws, but the "HELP!" company doesn't make our M10x1.25 size :-(
http://www.speedbleeder.com/images/sbani.gif
http://www.speedbleeder.com/ALL_BLEEDERS.jpg
Again our part is:
SB10125 # M10 X 1.25 1.35, (32.44)