MufflerTech Mid-Pipe

[CivicSI2002]

For all who have purchased the mid-pipe from MufflerTech and are having problems with it banging against the bottom of the car, I think I found the easiest solution. All I did was bend the two hangers at the end of the mid-pipe towards the driver side of the car about an inch, more might be needed to give it more clearance but I haven't heard any banging since I re-installed the pipe. This pushes the pipe more towards the passanger side. Hope this helps.

[eurosteez]

cool thanks for the tip
I'm gonna do this tomorrow

[Zero Three Si]

Here's even a better solution...


Take your Ep to a Ma' n Pa' muffler shop. Buy the midpipe from them for 50 bucks, give them another 25 bucks to put it on and all your problems are solved for 75 bucks. You're in and out in less than an hour.

[eurosteez]

Originally posted by Zero Three Si
Here's even a better solution...


Take your Ep to a Ma' n Pa' muffler shop. Buy the midpipe from them for 50 bucks, give them another 25 bucks to put it on and all your problems are solved for 75 bucks. You're in and out in less than an hour.

every muffler shop by my house wanted at least 120+ for this job
no thanks, i go for bolt on