PDA

View Full Version : RSX-S Sway Bar INstall HELP!



DoMahMeGok
12-13-2003, 09:15 PM
Ok
I tried unbolting the bar from the endlinks
but when I turn the bolt it doesn't come loose. I look at it and between the piece with 4white dots on it and the bar is this metal thing that is also turning when I try to turn the bolt. I read on k-series to use a needle nose plier to hold that still but it does not work. any ideas as to what I should be doing or what I'm doing wrong?
Thanks alot

NamingException
12-13-2003, 11:27 PM
You have to stick an allen wrench in the endlink to keep it from turning.

Peking
12-14-2003, 08:47 AM
Originally posted by NamingException
You have to stick an allen wrench in the endlink to keep it from turning.

Yes, did you try a search. I have covered the install before.

Check this forum here for more info...
http://www.ephatch.com/forum/showthread.php?s=&threadid=24307