Beoss
12-21-2003, 08:36 AM
Ok here's my set up
Rev hard Manifold
Rev hard downpipe
Rev hard IC
440cc injectors
Turbonetics t3 t4 hybrid turbo
Turbonetics external wastegate
bov
vafc
custom piping from gruven auto.
its not installed yet, because i have a map sensor question. what do i need to do to make sure the ecu will allow me to boost. I believe with the turbo going on and not upgraded map sensor, it will peak really high when boost is engaged. Is there any map sensor i could get or can i fool the map sensor into not seeing the boost.
also, i'm looking to run 10-12 psi. but i first need a larger fuel pump and new or slightly used NGK platinum spark plugs. any help would be great.
Rev hard Manifold
Rev hard downpipe
Rev hard IC
440cc injectors
Turbonetics t3 t4 hybrid turbo
Turbonetics external wastegate
bov
vafc
custom piping from gruven auto.
its not installed yet, because i have a map sensor question. what do i need to do to make sure the ecu will allow me to boost. I believe with the turbo going on and not upgraded map sensor, it will peak really high when boost is engaged. Is there any map sensor i could get or can i fool the map sensor into not seeing the boost.
also, i'm looking to run 10-12 psi. but i first need a larger fuel pump and new or slightly used NGK platinum spark plugs. any help would be great.