PDA

View Full Version : 2 most recent add ons, I'm lovin them..!


ALCT
12-23-2003, 01:21 PM
let me know what you think. momo race airleather & xm radio.
http://www.imagestation.com/picture/sraid94/pc4f3efd3e9a27f95b8afb9706b417e9f/fa38197e.jpg
http://www.imagestation.com/picture/sraid94/p92fbf6e0414e4fcb36fb2bca6c2b9b09/fa38197b.jpg
NamingException
12-23-2003, 01:26 PM
Those items both look nice. That mount for the radio looks pretty convenient.

Edit: How much heft does that shift knob have to it?
Z26
12-23-2003, 01:26 PM
Shift knob is cool. But the XM unit is an eyesore. They need to come up with a single din XM reciver.
Civicvtec1ps
12-23-2003, 02:15 PM
Momo shiftknob !!
Looks good.
eurosteez
12-23-2003, 02:20 PM
does the momo fit good? shorter?
Zero Three Si
12-23-2003, 02:20 PM
We haven't had any good "My car got broken into" lately. I wonder how long before someone steals his XM radio.
ALCT
12-23-2003, 02:41 PM
Originally posted by eurosteez
does the momo fit good? shorter?

momo knob fits good, it's a tad shorter and heavier than stock knob, sporty, easier to grab.
xm is removable, I never leave it in the car. so I dunno if they steal the cradle and the wires I'll call it bad luck...!:)
JapanExpress
12-23-2003, 02:48 PM
hahaha, nice choice on the song! :D
BlasTech
12-23-2003, 03:00 PM
I'm digging the shift knob, how much was it?
SSMep3
12-23-2003, 05:41 PM
any modifications needed?
STP03BlueSI
12-23-2003, 06:17 PM
Nice install on that XM!
Loudpedal
12-23-2003, 06:25 PM
The MOMO looks really good, and the XM will look better once you've taken off the clear shipping cover off the screen.
ALCT
12-23-2003, 06:53 PM
Originally posted by SSMep3
any modifications needed?

I reversed the chrome piece also there is a rubber washer inside to keep the boot up however it still slides down a little, I will be ordering the momo leather boot that screws on the knob.
knob is $71.20 @ neuspeed website.

Loudpedal: plastic cover is off :D
SSMep3
12-23-2003, 08:43 PM
what do u mean reversed? do u mean u put it on upside down?
does it slide down while making shifts or is it just not as snug as the stock knob? thanx looks good
ALCT
12-23-2003, 09:26 PM
Originally posted by SSMep3
what do u mean reversed? do u mean u put it on upside down?
does it slide down while making shifts or is it just not as snug as the stock knob? thanx looks good

yes its on upside down, if you look closer you'll see a skinny black plastic piece under momo ring, that was originally under the boot and silver ring was outside, just reversed it.
boot slides down not the knob, if you look closer again there is a small gap between that plastic piece and momo ring, makes it look cheap, I couldn't find a solution for that.
SSMep3
12-23-2003, 09:42 PM
my friend has a sim. set up he modified as well. I will check that out and post some pics thanx man i might pick one up that looks good
SSMep3
12-23-2003, 09:53 PM
here is the post on what he did with his rsx knob and it works perfect.
http://www.ephatch.com/forum/showthread.php?s=&threadid=21562