PDA

View Full Version : On the Purge...



k20hatch
12-30-2003, 09:03 PM
Ok guys...I have a nx kit and i have the purge kit running outa my front bumper with the "v" adapter. So therefor it comes from one place out of my front bumper but in a "v"...Ok...so heres what im trying to do...Do they make a kit or adapter to run another purge line from the same bottle so that i can purge out of each side of the front bumper? Sorry for all the ricer questions...I kno its from the 2f2f skyline but i was wondering if its possible....or do they make a kit for it?? Thanks for all your help!!

K20hatch

bc2k20a3
12-31-2003, 02:50 AM
if you have the v you can connect the purge up to it and run the 2 lines off of it to where you need to go.if you would be willing to come to nc i could run them for you.let me know if this helps.

Vertigo
12-31-2003, 08:01 AM
I helped a friend do this on his car a few months back. We used 60 inch pieces of brake line and custom bent them. Just run one line out of the purge valve and down to the bumper then use a brass "T" fitting. Bend and cut each line to the correct size for each side then attach at the "T" fitting. Volla! Done! Your bumper should now be snarling like Godzilla.

NuG
01-07-2004, 09:47 AM
Do you have to have the system engaged to purge? Or does it run off another power source, thanks.

Btrthnezr3
01-07-2004, 09:54 AM
Lets face it, there is a little bit of rice in all of us. Post some pics/vids/write up when you get everything squared away!

Vertigo
01-15-2004, 03:24 AM
Did you get your purge lines set up the way that you wanted to yet?

k20hatch
01-15-2004, 08:57 AM
No actually i didnt...im kind of lazy didnt take the time. I ran the purge line to the top of my front bumper and ran a V Adapter to shoot it in a V. I would love to do the other set up. will probley wait until it warms up outside. This will do fine for now!

Vertigo
01-15-2004, 08:02 PM
Aaawww....Lane excuse! j/k! It is colder than a well digger's ass outside! I'm already looking foward to spring time!

02HatchSI
01-18-2004, 05:28 PM
so how bout some pics with the car purging or something... how bout some pics of ur car with the bottle, lines, etc... I am kinda intrested in what tis would look like...:cool:

k20hatch
01-19-2004, 10:29 AM
Let me get ahold of my friends digi...I dont have one...But ill get yall some pics...try to get a video to!

87gn
01-19-2004, 09:47 PM
ive got some line benders, pipe cutters, and all the tools that you will need in my shop if ya need some help when it gets alittle warmer. btw, how much of a shot are you running?

k20hatch
01-19-2004, 09:49 PM
55 shot...but motors clean from nitrous...will stay like that for along time...Just wanting turbo kit for intercooler sprayer!

danoonez
01-22-2004, 12:38 PM
Originally posted by 87gn
ive got some line benders, pipe cutters, and all the tools that you will need in my shop...

Why don't you move to Texas?

87gn
01-24-2004, 08:26 PM
cause i dont like posionious critters like scorpions. i can deal with the rattalers, copper heads, and occasional bear that i run in to in the mountians but them danged little legged mofos scare the crap outta me.

k20hatch
03-20-2004, 08:25 PM
I finally decieded to do it....after this long time....heres the pic...

http://members.cox.net/ph1g1ty/Mike%20Purging.JPG

Vertigo
03-20-2004, 08:28 PM
Nice pic! Glad to see you finally got it done.

k20whiteboi269
03-20-2004, 08:33 PM
sweet install. your car looks nice as well... id like to see more pics

WarmPepsi
03-25-2004, 05:23 AM
Originally posted by k20hatch
I finally decieded to do it....after this long time....heres the pic...

http://members.cox.net/ph1g1ty/Mike%20Purging.JPG

red x for me.

Not sure how you did it, but i'd have ran plastic line. Cheap, durable, no special bending needed, and it'll go anywhere you want it to go. The stuff is made to hold 3000 psi continuous, so venting 1000 psi isn't a big deal.

:cool:

k20hatch
03-25-2004, 06:03 AM
You have to run copper, plastic lines willl freeze!

WarmPepsi
03-25-2004, 06:12 AM
Originally posted by k20hatch
You have to run copper, plastic lines willl freeze!

not on a purge. You're not even holding constant pressure. A purge merely releases it. Besides, if you're purging for more than 5-10 seconds, you're just wasting n2o, and burning the senenoid ;)

k20hatch
03-26-2004, 10:44 AM
It still clears left over nitrous out of the lines...when i do it somtimes the lines are freezing from the purge. I dunno i was told from proline performance to run copper tubing, thats why they give it to you in the purge kit. Oh well who really cares i have copper tubing...works great!:D

WarmPepsi
03-26-2004, 10:49 AM
Originally posted by k20hatch
It still clears left over nitrous out of the lines...when i do it somtimes the lines are freezing from the purge. I dunno i was told from proline performance to run copper tubing, thats why they give it to you in the purge kit. Oh well who really cares i have copper tubing...works great!:D

yes, whatever works is awesome, just working with copper and movin it where ya want it and stuff can be a pain.

sounds like you got everything set and good though :cool:

k20hatch
03-26-2004, 10:55 AM
Originally posted by WarmPepsi
yes, whatever works is awesome, just working with copper and movin it where ya want it and stuff can be a pain.

sounds like you got everything set and good though :cool:

Ya nooo kiddin man!! We used pipe benders because i wanted everything to look nice and clean...took AWHILE to get everything done but its how i like it!

WarmPepsi
03-26-2004, 02:55 PM
Originally posted by US_Si
The image name is case sensetive.


good catch. :cool:

k20hatch
04-01-2004, 12:51 PM
The image name is case sensetive.

Whats that mean?

k20hatch
04-01-2004, 01:02 PM
ahh thanks man!

Ep3 No.2
04-02-2004, 10:16 AM
damn thats hott !.
sorta ricer lookin but i love it!

k20hatch
04-02-2004, 10:19 AM
sorta ricer lookin but i love it!

Ya but i love it to! :D