NBP_03Si
01-14-2004, 08:40 PM
sup u all, i received my catz and i decide to share the installation with u all, i made like a "how to" so i hope it helps people out there...
well it goes like this:
what i installed was the bulbs and the amplifier for the catz.
well car get on stands since we going under
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMjQ1NTYxNnM0MTNkZmQzMXk1NDE%3D.jpg
front bumper come out easily just take the plastics bolts at tops bottom and sides (air filter extreamly dirty)
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMjQ1NTYyNnM0MTNkZmQzMXk1NDE%3D.jpg
side view
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMjQ1NTYzNnM0MTNkZmQzMXk1NDE%3D.jpg
this is each amplifier and the bolts
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMjQ1NTY0NnM0MTNkZmQzMXk1NDE%3D.jpg
closer look (bulb are inside headlight already)
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMjQ1NTY1NnM0MTNkZmQzMXk1NDE%3D.jpg
after looking around i found one ( new air filter is on i need to clean the old one)
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMjQ1NTY2NnM0MTNkZmQzMXk1NDE%3D.jpg
this is the rigth side, cables and wiper fluid makes it harder.
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMjQ1NTY3NnM0MTNkZmQzMXk1NDE%3D.jpg
only position i found
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMjQ1NTY5NnM0MTNkZmQzMXk1NDE%3D.jpg
this is how the rigth side looks like after i bolted on
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMjQ1NTk0NnM0MTNkZmQzMXk1NDE%3D.jpg
this is how the left side looks like after i bolted on
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMjQ1NTcwNnM0MTNkZmQzMXk1NDE%3D.jpg
After plugging the cables this is how it looks like
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMjQ1NTcxNnM0MTNkZmQzMXk1NDE%3D.jpg
after putting the bumper back this and lowering the car everything is back to normal.
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMjQ1NTcyNnM0MTNkZmQzMXk1NDE%3D.jpg
Special thanks to (tiger_si) we did it togher....
sorry about the cheapy camara thats the best i could do
thanks u all and i hope i save u sometime...
well it goes like this:
what i installed was the bulbs and the amplifier for the catz.
well car get on stands since we going under
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMjQ1NTYxNnM0MTNkZmQzMXk1NDE%3D.jpg
front bumper come out easily just take the plastics bolts at tops bottom and sides (air filter extreamly dirty)
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMjQ1NTYyNnM0MTNkZmQzMXk1NDE%3D.jpg
side view
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMjQ1NTYzNnM0MTNkZmQzMXk1NDE%3D.jpg
this is each amplifier and the bolts
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMjQ1NTY0NnM0MTNkZmQzMXk1NDE%3D.jpg
closer look (bulb are inside headlight already)
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMjQ1NTY1NnM0MTNkZmQzMXk1NDE%3D.jpg
after looking around i found one ( new air filter is on i need to clean the old one)
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMjQ1NTY2NnM0MTNkZmQzMXk1NDE%3D.jpg
this is the rigth side, cables and wiper fluid makes it harder.
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMjQ1NTY3NnM0MTNkZmQzMXk1NDE%3D.jpg
only position i found
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMjQ1NTY5NnM0MTNkZmQzMXk1NDE%3D.jpg
this is how the rigth side looks like after i bolted on
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMjQ1NTk0NnM0MTNkZmQzMXk1NDE%3D.jpg
this is how the left side looks like after i bolted on
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMjQ1NTcwNnM0MTNkZmQzMXk1NDE%3D.jpg
After plugging the cables this is how it looks like
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMjQ1NTcxNnM0MTNkZmQzMXk1NDE%3D.jpg
after putting the bumper back this and lowering the car everything is back to normal.
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMjQ1NTcyNnM0MTNkZmQzMXk1NDE%3D.jpg
Special thanks to (tiger_si) we did it togher....
sorry about the cheapy camara thats the best i could do
thanks u all and i hope i save u sometime...