PDA

View Full Version : sc32 in my k20a3??



Ep3_kid
01-18-2004, 02:12 PM
ok guys, i'm about to trade my old car for a turbo kit for a b-series motor. it comes with a sc32 turbo (Compressor specs: .60 A/R Housing, 60 Trim Wheel, Turbine specs: .63 A/R Housing), Have a Fmax turbo manifold, Tial 35mm wastegate with dump tube. Large spearco intercooler with pipings for '94-01 Integras. rc 550cc injectors, and other crap. my question is, if i sell this turbo manifold, and the pipings and i get a custom manifold for the ep for that turbo, and the piping for the ep3. can this work fine on the ep?? also, can the intercooler be used on my car??

any help will be appretiated

Damian

ps: i posted the same thing in k-series.com

Ep3_kid
01-18-2004, 02:14 PM
turbo tech, i need your help. :D

oldskool
01-19-2004, 03:31 AM
a compressor map would tell you if is the right turbo for your purpose

Vertigo
01-19-2004, 03:58 AM
That AR is a little big, but not that big. As long as the sc32 is a T3/T4 style housing it will work on the EP with the correct manifold. I don't think that the IC will work though, but i may be wrong.

Ep3_kid
01-19-2004, 06:58 AM
sorry for my ignorance, but what is a compressor map??

Vertigo
01-19-2004, 08:25 AM
A compressor map is like a spec sheet for the turbo. It tells you the right size of turbo for which application.
You can look here:
http://www.turbocalculator.com/how-to-read.html
http://www.turbonetics.com
http://www.gnttype.org/techarea/turbo/turboflow.html