PDA

View Full Version : side markers and turn signals



Ocelot
01-22-2004, 03:46 PM
is there a trick to removing the turn signal lenses and side markers without breaking the inner clips? I wanted to remove my turn signal lens, so I followed the instructions and pushed it toward the rear of the car. Instead of the clip flexing, it just broke. So I had to pay $12 for another one. I am afraid to do the other side now.

thanks

Ocelot
01-23-2004, 05:15 PM
bumpeh!

PanchoEp3
01-23-2004, 06:40 PM
What I did is turn the tire then take off the inner wheel well. There plastic screws so be carefull then just put your arm in and squeze the clips and push out.It's a little tricky. As for the bumper side markers ive never had to take those out. Might be the same way.

Ocelot
01-23-2004, 11:24 PM
I meant the turn signal on the fender and the side markers on the front bumper.

thank you, though. :)

Ocelot
02-05-2004, 02:41 AM
Originally posted by PanchoEp3
What I did is turn the tire then take off the inner wheel well. There plastic screws so be carefull then just put your arm in and squeze the clips and push out.It's a little tricky. As for the bumper side markers ive never had to take those out. Might be the same way.

oic . . I apologize . . I must have been on crack when I replied to this before. I getchya now. :) I "skimmed" it and thought you were talking about the parking lights in the headlight assembly.

:D

dofu
02-05-2004, 04:03 AM
you jus need to be gentle and use a lil finesse with a lil power to get that thing out the first time... after that, it aint no prob.

dj addicted
02-05-2004, 06:21 AM
I had no problem removing mine.. I have blue LEDs in there now.. It wasnt as smooth as the manual makes it out to be.. but nothing broke.

Kis4KEN
02-09-2004, 01:53 AM
wth?!? i changed my side markers out for dc5r side markers in less that 5 minutes...
...nothing broke

Graywolf
02-12-2004, 04:30 PM
Only one of mine broke. It still fits, even with only 1 clip

Kis4KEN
02-12-2004, 10:05 PM
Originally posted by dj addicted
...I have blue LEDs in there now...

how much that cost ya?