turbo Q need A

[o2seriouSi]

just wondering i have the greddy turbo kit but my check engine light is on because i gutted out the kit is there any way i could remove the check engine light........i kno its b/c of the o2 sensor wat can i do.........or should i just get the high flow cat,,,,,,thanx in advance

[oldskool]

what exactly do you mean "gutted out the kit?"

[EPHatchgirl]

Originally posted by oldskool
what exactly do you mean "gutted out the kit?"


Yeah... what he said... ???

[DynaSpeed]

I think he meant "gutted out the cat", and if that's the case, you can just get the o2 sim from caspers.

[2k2SiAutoXer]

o2, sorry I dont have an answer on the cat (kit) issue but hows the turbo? are you running introcooler, stock boost? Thanks

--Tom

[EPHatchgirl]

Originally posted by DynaSpeed
I think he meant "gutted out the cat", and if that's the case, you can just get the o2 sim from caspers.

Dynaspeed, thanks for clearing that up!

...and of course, you're right... easy fix.:)

[fsugatorbait]

Id get the Casper unit. Ive been running it now for the last 5 days, about 250 miles without a CEL or pending code. Before, the CEL would come on after about 50 miles. Also, tested both o2 sensors, before the 1st sensor read constant at .63xV-.64xV and the 2nd one varied greatly from about .32xV-.85xV in a up and down consistant pattern. With the sim, the second one only varies from .32xV-.64xV. If things changed ill let ya know.