View Full Version : A2 swap info and how much......
turbodreams02
02-01-2004, 05:13 PM
im debating on either the rev hard turbo kit on the A3 or do the A2 and 6 spd. Are there any qualified shops in florida that can do this and not for an arm and a leg...?
mrfixit687
02-01-2004, 06:54 PM
you get what you pay for
downhil
02-01-2004, 06:56 PM
the swap, or the turbo install and tune?
bioevolve
02-01-2004, 07:30 PM
Any A2 swap info let me know, I can answer most of your Questions. Also, can do the swap for ya and not for an arm and a leg, maybe an eye. :D ;)
skooba
02-01-2004, 10:19 PM
Originally posted by bioevolve
Any A2 swap info let me know, I can answer most of your Questions. Also, can do the swap for ya and not for an arm and a leg, maybe an eye. :D ;)
shooting for a ballpark range, how much is an eye worth to ya????? ;)
turbodreams02
02-02-2004, 11:43 AM
well how much would the engine alone cost? also im not familiar with swaps and im not sure how much they cost
bioevolve
02-02-2004, 04:24 PM
Originally posted by vbp si 03
shooting for a ballpark range, how much is an eye worth to ya????? ;)
I don't know $500-$1000 depending on how fast you want it done.;)
EDIT: that is just LABOR!
SiRacer03
02-02-2004, 04:37 PM
Yea, around that price range if you want cheap. The cheapest would be the head swap and ECU but keeping your 5spd.
turbodreams02
02-03-2004, 10:40 AM
where are you at in florida and how much would the head and ecu be and the install?
bioevolve
02-03-2004, 12:09 PM
Head and ECU probably $300-$500 not including the computer flash at dealership.
EDIT: that is just LABOR!
turbodreams02
02-03-2004, 01:20 PM
you said you could do the swap...have you done one before and could i just go hondata instead of the factory rsx ecu. where in florida are you?
Not trying to answer for bio here, but I think he's done two
swaps IIRC. Maybe just one...
Anyway, if you're going A2, any reason why you want the RSX 6spd?
Just b/c it would come with it? Just curious (most say on a road/autoX
course, it would be better to keep the 5spd).
A couple guys have finagled (Adam, you bastard! ;)) a complete swap
for as little as under $2K. Others have paid almost that much for
just the head swap. I think Hondata can reflash your ECU for you, but
not if you want the 6pd - that requires the RSX-S ECU. Double check
that by going to hondata.com...
bioevolve
02-03-2004, 02:06 PM
Thanks Andy :D
Yes, I done a swap and many other things.
click here for some info (http://www.ephatch.com/forum/showthread.php?s=&threadid=8133)
You can use the A3 ECU reflashed by Hondata for head setup.
5sp tranny can be reused, but many have slower times and mph in the 1/4 with A2 w/ 5sp tranny.
6sp tranny is best for A or A2 setup.
A2 ECU then flash Hondata is what I used to use, now I'm using the JDM ECU (smoother vtech change, no power dip, and no CEL ;) )
Cape Coral/ Fort Myers area.
anjapower
02-03-2004, 02:54 PM
can the EP3 harness be used on the RSX-S ECU? Some places say you need the harnesses, but some places don't mention anything about needing the RSX-S harness.
bioevolve
02-03-2004, 04:29 PM
I've heard the same thing. I guess beacause of the Pin Out configuration, ground wires at different points to the ECU. I'll have to check my manuals.
TunerSi
02-03-2004, 08:09 PM
I have the manuals, the pinouts seem to be very similar. I also wonder if you can run the type-S controller in the EP without a problem.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.