Ephatch >
Tune-Up >
Engine > MSD retarding with original hondata reflash on an a2 head a3 bottom end
View Full Version : MSD retarding with original hondata reflash on an a2 head a3 bottom end
Hatch02SI
02-17-2004, 07:28 PM
is it possible to retard the cams enough for a 50 shot? what is possible besides the whole thing over a2 swaps... lmk
jon
!@#$%
02-17-2004, 09:02 PM
if it were me, id spend the extra dough on programmable hondata. good insurance
chunky
02-17-2004, 09:51 PM
retarding the timing would help, but you'd also need to put more fuel in.
so msd + vafc, and you might be able to work it.
danoonez
02-17-2004, 10:14 PM
Originally posted by Hatch02SI
is it possible to retard the cams enough for a 50 shot? what is possible besides the whole thing over a2 swaps... lmk
jon
Shouldn't need to retard it for a 50 shot. Nobody in the Nitrous forum has ever had a problem with the basic 50-55 shot.
redronin22
02-17-2004, 10:46 PM
ask nug (dude with a 740) he got hooked up with free Hondata and a NX kit. they did some dynos n testing on his ride. maybe he's still around to enlighten us.
Hatch02SI
02-18-2004, 09:19 AM
So it is possible to run a 50-55 shot with the original hondata program even though it says not to? I am f*ing lost!!!:confused: I still need to decide... type s head + 75 shot or a3 head +50 shot, hondata and wait for cams,throttle body,intake manifold?
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.