PDA

View Full Version : springs and nuts?



Marc-111
02-24-2004, 07:39 AM
can i use my 2001 tanabe springs to a 2004 EP hatch (planning to buy)? the springs and shocks (stock) looks very similar? and does the 2004 EP hatch really comes with 5 studs? can i request to the dealer to make it 4 studs for me to use my 4 stud magwheels or will i just sell them and buy a 5 stud? thnx!

andy
02-24-2004, 07:56 AM
Holy noob-ness. Welcome to the board. ;)

I wouldn't use those springs on an ep3. The spring rate is probably
off. Besides, you can get ep3-specific springs for well under $200
(Tein S Techs, a popular choice, are something like $140) that won't
blow your shocks after a few months.

Yes, the 2004 Civic has 5-lug wheels/hubs. So your old wheels
wouldn't fit. Sell those and get a set of 5-lug wheels. You could
convert back to a 4 lug setup, but why? Too much time and effort. Unless
your wheels are $20K apiece, don't bother.

jaydub
02-24-2004, 09:09 AM
Actually one small correction to andy's post: The S-Techs are not EP specific, so you may want to use those at your own risk. I believe something like Eibach SPortlines or Progress springs (which are EP specific) would be a better choice.

I currently have the S-Techs, and they are far too soft.

dofu
02-24-2004, 09:47 AM
if you really want, i'll trade you my four lug for your five... ;) :D

Marc-111
02-24-2004, 09:30 PM
thnx! i guess im gonna buy a new 5 lug magwheels and a new suspension:D