PDA

View Full Version : how to take off taillights



ForTheLadies
03-04-2004, 04:37 PM
can somebody give me a step by step instructions on how to take off my taillights? will i need to take off my rear bumber? what else do i need to do? im planning to put some taillights on. thanks in advance

oogy-boogy
03-04-2004, 05:50 PM
Here ya goooo:

LINK-OOOOOOO!!!!!!!!!!!!!!!! (http://www.ephatch.com/forum/showthread.php?s=&threadid=20621&highlight=tail+light+removal)


HTH :D

ForTheLadies
03-04-2004, 05:59 PM
seems pretty simple. thanks a bunch for the link :)

k20whiteboi269
03-04-2004, 06:02 PM
yea its not too bad. i had some trouble realigning the bumper when i put it back on, but nothing i couldnt handle. should take you about 35 mins using the above link.

oogy-boogy
03-04-2004, 06:03 PM
Originally posted by ForTheLadies
seems pretty simple. thanks a bunch for the link :)

No prob.....Try and get an extra hand when putting on so you have less of a chance of scratching it.

ForTheLadies
03-04-2004, 06:08 PM
hmm..on the first step it says remove a screw near the wheel well. there are 2 screws on each side i cant seem to get the bottom screw off unless i remove my whole wheel because the even if i use a small screwdriver it's too long and wont fit to unscrew it. how can i remove it without removing the wheel??

oogy-boogy
03-04-2004, 06:11 PM
Originally posted by ForTheLadies
hmm..on the first step it says remove a screw near the wheel well. there are 2 screws on each side i cant seem to get the bottom screw off unless i remove my whole wheel because the even if i use a small screwdriver it's too long and wont fit to unscrew it. how can i remove it without removing the wheel??

I used a little right angle ratcheting screwdriver. Picked it up at Walmart for ~ $4.00.

ForTheLadies
03-04-2004, 06:17 PM
ohh okok cool thanks :D

STP03BlueSI
03-04-2004, 09:40 PM
grrr Have fun with the 3 on the inside. The ones at the top are a real bitch.

Took me about 30 mins to convert my 03 US Si tails to JDM ones:)