PDA

View Full Version : Air/ Fuel SensorHELP!!!!!


priest6479
03-07-2004, 12:59 PM
Ok I goofed up good, The wires that run to the Primary Air/Fuel sensor (That's the sensor on the front of the catalytic converter, Not the middle). There are 2 black wires, 1 green wire and 1 white wire. All for of these wires got ripped out of that small grey plug hich I guess runs to the ECU. How do these wires go back into the plug? does anyone know? can someone look under their car for me?
Peking
03-07-2004, 02:00 PM
Originally posted by priest6479
Ok I goofed up good, The wires that run to the Primary Air/Fuel sensor (That's the sensor on the front of the catalytic converter, Not the middle). There are 2 black wires, 1 green wire and 1 white wire. All for of these wires got ripped out of that small grey plug hich I guess runs to the ECU. How do these wires go back into the plug? does anyone know? can someone look under their car for me?

Let me see if I can find you some pics, cause I know someone has taken them. Also moving to the engine section :)
Peking
03-07-2004, 02:38 PM
Ok maybe these could help some. There are off the RSX though, could still be of some use...

http://gallery.consumerreview.com/mtbr/passion/pictures/MVC-006S.jpg

http://gallery.consumerreview.com/mtbr/passion/pictures/MVC-008S.jpg
priest6479
03-07-2004, 04:28 PM
Thanks for the reply, but unfortuantly that's doesn't help too much.
The wires that go into the sensor are not the prob, it's the wires that go into the grey plug near the bottom of the engie bay are what I need, both are out of sight in the pictures.

But don't think i don't appreciate it, any help I can get is better.
priest6479
03-07-2004, 05:52 PM
OK figured it out, special thanks to black02SI for crawling under his car and looking for me!!!! I owe you a sixpack amigo

in case anyone wants to know, this is the pinout.

http://209.123.203.246/temp/DSCF0008.JPG

Thanks again to all!
Black 02 SI
03-07-2004, 07:40 PM
no prob, anything to help out a fellow ephatcher or anyone for that matter.
Peking
03-07-2004, 10:30 PM
Originally posted by priest6479
Thanks for the reply, but unfortuantly that's doesn't help too much.
The wires that go into the sensor are not the prob, it's the wires that go into the grey plug near the bottom of the engie bay are what I need, both are out of sight in the pictures.

But don't think i don't appreciate it, any help I can get is better.

Don't worry glad you got something from someone :)