PDA

View Full Version : DIY - H4 Hi/Low HID kit install EP3



Spazhead
03-15-2004, 01:51 PM
because the EP and most new cars run off a ground base lighting system, i had trouble with wiring up those plug and play Hi/Low HID kits, so i made up my own relay system to hook up to the existing H4 factory plug. I think it's pretty self explained but if you have any question, please feel free to ask. BTW, if you are using a LOW beam kit only, this does not apply to you!! :D



http://www3.sympatico.ca/wildpony/EP3HID.JPG

RxPhi
07-05-2011, 04:04 PM
quick question would i need to get a dual beam or a single beam hid kit? thanks

ep3jd
07-05-2011, 04:07 PM
..what

RxPhi
07-05-2011, 05:51 PM
whats the diffrence between Single beam and dual beam kit? someone told me i need a dual beam for my 03 ep3

ep3jd
07-05-2011, 06:17 PM
You need a hi/lo kit because you only have one bulb for both being 02/03, versus two.


Or you can get a single and not have hi beams. Your choice.

jed_averill
07-06-2011, 10:12 PM
Single is cheaper. I barely use high beams so I might just get single as a replacement.

PatrickJamesYu
07-06-2011, 11:56 PM
I use the Hi beams decently often.
To not danger on coming drivers, I have mine pointed pretty far down
And on late night canyon rides, the Hi beams come in handy.