PDA

View Full Version : Basics Questions



BlackCivi02
03-30-2004, 06:09 AM
I am going to be putting a set of Tein basics on in a couple days. I just want to know if I had to do any modification to the Tein's at all. I anyone has any instruction on how to do these that would be helpful.

andy
03-30-2004, 08:21 AM
Shouldn't need to mod anything. They should bolt right in.

For instructions, check out k-series.com's spring install instructions.
Those are decent.
Also, run a search on here for "tein AND install" or something along
those lines - there used to be a 150+ post thread on installing
coilovers, including tips and things to avoid (like your axle
falling out).

BlackCivi02
03-30-2004, 09:30 AM
Thank you

bobdobbs
03-30-2004, 10:45 AM
Yup, no mods to install the Basics. You'll need a camber kit for the rear. Didja get that?

BlackCivi02
03-30-2004, 12:59 PM
Not yet. What are some brands, and about how much do they run? I only want to lower it about an 1" to 1.5". Is that going to be low enough to mess up the camber that bad?

Civicvtec1ps
03-30-2004, 02:08 PM
Camber kit shouldn't be needed with that drop.
I don't have one...
It's totall up to you.
Camber kits won't hurt you in long run.