PDA

View Full Version : eibach sway bars



bsdbytes
04-05-2004, 06:59 PM
Has anyone here tried the eibach sway bars for the EP? I remember seeing a thread about some people using the RSX sways on the EP but never heard how they performed. The specs state that they are 25mm front and 23mm rear.

siver-SI
04-05-2004, 07:53 PM
Good question. I would think though that you would need a linkage upgrade though with the bigger sway bar in the rear.

Tnhatch03
04-05-2004, 10:46 PM
239 shipped from showstoppers...civicboost has them...i found the thread but the pics weren't working but here ya go...i hope this helps

http://www.ephatch.com/forum/showthread.php?s=&threadid=28735

cpu519
04-06-2004, 09:39 PM
Eibach sways are hollow and although lighter, won't have the stiffness of the same size solid bar. That said, the stock Si front bar is also 25mm. The 23mm Eibach rear is probably slightly less stiff than a 22mm solid bar, it can be calculated if you know the wall thickness of the tubing. The RSX rear sway is a good upgrade, the front will allow more roll than stock because it's smaller in diameter than the Si bar.