Whooopasss
10-12-2002, 08:10 AM
Ok.. I emailed J&S asking about the J&S safeguard V2 4 channel (for our 4 coils) and they said, if one of our 02 Si boys would show them a 02 Si so they can check the ignition to see if it will work.. if the J&S safeguard V2 works on the Si, this will help 02 Si owners who would be going FI in the future.. so Who among you would like to show the people in J&S there 02 Si (Scal) if I was in Scal I would)
Here was the email exchange between me and J&S
Ok, the diagram for the MR2 Spyder is up, but I won't have one for the four
coil Honda until I have one to look at.
Some guy from the S200 forum emailed me, looking for a test unit. I think
he said he was the moderator of this forum:
http://www.s2ki.com/forums/forumdisplay.php?s=&forumid=22
He said he would be bringing a car down to LA to have a bunch of stuff done
to it, and I could check it out then. Don't know when that will be.
Do you know of someone in the LA area that has a four coil Honda, that I
could look at?
John and Shirley Pizzuto
J&S Electronics
www.jandssafeguard.com
714 534 6975--
> To: "'John Pizzuto'" <jpizzuto@jandssafeguard.com>
> Subject: RE: J&S safeguard V2 (4 channel)
>
> Yes.. it is exactly the same as the s2000.. I'll check the MR2 board.. but if
> you have a diagram that would be wonderful..
>
> -----Original Message-----
> From: John Pizzuto [mailto:jpizzuto@jandssafeguard.com]
> Sent: Friday, October 11, 2002 11:37 AM
> Subject: Re: J&S safeguard V2 (4 channel)
>
>
> Jay:
>
> Thanks for the inquiry. Does your engine have the same ignition system as
> the S2000?
>
> We have developed versions of the 4 channel for several vehicles, but have
> not had the chance to check out the four coil Honda system.
>
> Here's a link to the MR2 Spyder forum, where you can search on "J&S", and
> read some of the threads:
>
> http://www.spyderchat.com/phpBB/viewforum.php?f=3
>
> I'll post the Spyder instructions soon.
>
>
> John and Shirley Pizzuto
> J&S Electronics
> www.jandssafeguard.com
> 714 534 6975--
>
>> Date: Fri, 11 Oct 2002 11:05:55 -0700
>> To: "'jpizzuto@jandssafeguard.com'" <jpizzuto@jandssafeguard.com>
>> Subject: J&S safeguard V2 (4 channel)
>>
>> Hi
>> We were looking at the J&S safeguard
>> V2 4 channel for us on a 02 Si. Since the 02 Si has 4 coils, is it right to say that the V2 4
>> channel is the right system to use for a turbo 2002 Civic Si (K20 engine,
>> same
>> as the RSX). If it is, can you shoot us a diagram how it is connected so we
>> would be sure that that is what we need before we order them (we will compare
>> it with the 02 Si ignition diagram). How much is it for the 4 channel?
>>
>> jay
>>
>
Here was the email exchange between me and J&S
Ok, the diagram for the MR2 Spyder is up, but I won't have one for the four
coil Honda until I have one to look at.
Some guy from the S200 forum emailed me, looking for a test unit. I think
he said he was the moderator of this forum:
http://www.s2ki.com/forums/forumdisplay.php?s=&forumid=22
He said he would be bringing a car down to LA to have a bunch of stuff done
to it, and I could check it out then. Don't know when that will be.
Do you know of someone in the LA area that has a four coil Honda, that I
could look at?
John and Shirley Pizzuto
J&S Electronics
www.jandssafeguard.com
714 534 6975--
> To: "'John Pizzuto'" <jpizzuto@jandssafeguard.com>
> Subject: RE: J&S safeguard V2 (4 channel)
>
> Yes.. it is exactly the same as the s2000.. I'll check the MR2 board.. but if
> you have a diagram that would be wonderful..
>
> -----Original Message-----
> From: John Pizzuto [mailto:jpizzuto@jandssafeguard.com]
> Sent: Friday, October 11, 2002 11:37 AM
> Subject: Re: J&S safeguard V2 (4 channel)
>
>
> Jay:
>
> Thanks for the inquiry. Does your engine have the same ignition system as
> the S2000?
>
> We have developed versions of the 4 channel for several vehicles, but have
> not had the chance to check out the four coil Honda system.
>
> Here's a link to the MR2 Spyder forum, where you can search on "J&S", and
> read some of the threads:
>
> http://www.spyderchat.com/phpBB/viewforum.php?f=3
>
> I'll post the Spyder instructions soon.
>
>
> John and Shirley Pizzuto
> J&S Electronics
> www.jandssafeguard.com
> 714 534 6975--
>
>> Date: Fri, 11 Oct 2002 11:05:55 -0700
>> To: "'jpizzuto@jandssafeguard.com'" <jpizzuto@jandssafeguard.com>
>> Subject: J&S safeguard V2 (4 channel)
>>
>> Hi
>> We were looking at the J&S safeguard
>> V2 4 channel for us on a 02 Si. Since the 02 Si has 4 coils, is it right to say that the V2 4
>> channel is the right system to use for a turbo 2002 Civic Si (K20 engine,
>> same
>> as the RSX). If it is, can you shoot us a diagram how it is connected so we
>> would be sure that that is what we need before we order them (we will compare
>> it with the 02 Si ignition diagram). How much is it for the 4 channel?
>>
>> jay
>>
>