View Full Version : Camber kits for the 02 Si, who has em?
Ritteri
10-12-2002, 10:57 PM
Who makes a camber kit for our 02 Si's?? Do they make em for front and rear?? Is it needed for front and rear??? Im going to lower my car a bit and was wondering about info on this.
SLOlife
10-12-2002, 11:08 PM
http://solar.innercite.com/comptech/media/160-053.jpg
comptech (http://solar.innercite.com/comptech/suspension3.html)
Hope that helps:)
ssvr6
10-12-2002, 11:11 PM
Camber Adjuster - Front (02 Civic Si)
$25.30
Front Camber Adjuster
Fits: 02 Civic Si
1.75 +/- degrees of adjustment.
Contains 1 pair (both front sides). 1 kit per car.
Only for the front though, what about the rear?
Steve
Ritteri
10-13-2002, 08:12 AM
Yeah what about the rear?? Who has em? Or are they even needed?
CleanBlackSi02
10-13-2002, 08:22 AM
The front doesen't need it! We need REAR adjustment! I've heard about people using RSX parts... Any other info?
ek9jdmhb
10-13-2002, 11:38 AM
hey, i have one.
CleanBlackSi02
10-13-2002, 12:49 PM
Originally posted by ek9jdmhb
hey, i have one.
What's the level of adjustment on the sprint camber kit?
ek9jdmhb
10-13-2002, 12:51 PM
i honestly dont kow.
SmoothOperator
10-13-2002, 01:55 PM
I'm putting an Ingalls kit on my rear suspension this week. The front end looks okay......for now.
ssvr6
10-13-2002, 02:34 PM
(Ingalls, that's funny. My last name is Ingels.)
How much and what level of adjustment?
Steve
SmoothOperator
10-13-2002, 02:45 PM
I don't know the details. I was chatting with one of the guys at my dealership, and he suggested an Ingalls kit. They use them on every car that's lowered there. And they do a LOT of aftermarket work there too, so I trust his judgement. Once I know I'll relay the info here.
SmoothOperator
10-13-2002, 02:50 PM
Just looked it up and found it.....
http://www.ingallseng.com/images/3897.jpg
Adjustment range: -2
CleanBlackSi02
10-13-2002, 03:00 PM
[QUOTE]Originally posted by SmoothOperator
[B]Just looked it up and found it.....
http://www.ingallseng.com/images/3897.jpg
Adjustment range: -2
ssvr6
10-13-2002, 05:27 PM
Just look at the properties of the image.
http://www.ingallseng.com/images/3897.jpg
www.ingallseng.com
;)
Steve
CleanBlackSi02
10-13-2002, 06:22 PM
Originally posted by ssvr6
Just look at the properties of the image.
http://www.ingallseng.com/images/3897.jpg
www.ingallseng.com
;)
Steve
Clever clever.
02SilverSiHB
10-14-2002, 11:20 AM
I'm planning on getting these GSR for the rear
http://www.modacar.com/Merchant2/graphics/00000002/gsr3572.jpg
http://www.modacar.com/products/Honda/Civic/MODACAK/
CleanBlackSi02
10-14-2002, 12:10 PM
Originally posted by 02SilverSiHB
I'm planning on getting these GSR for the rear
http://www.modacar.com/Merchant2/graphics/00000002/gsr3572.jpg
http://www.modacar.com/products/Honda/Civic/MODACAK/
GSR?
02SilverSiHB
10-14-2002, 12:12 PM
Originally posted by CleanBlackSi02
GSR?
the company, not the car :D
CleanBlackSi02
10-14-2002, 12:12 PM
I just ordered an Ingalls kit for the rear that fits all 2001+ Civics and the RSX. Should be here along with my Neuspeed Race springs I have on order.
02SilverSiHB
10-14-2002, 12:15 PM
Originally posted by CleanBlackSi02
I just ordered an Ingalls kit for the rear that fits all 2001+ Civics and the RSX. Should be here along with my Neuspeed Race springs I have on order.
how much? I'd rather get those than some brand I've never heard of
CleanBlackSi02
10-14-2002, 12:54 PM
Originally posted by 02SilverSiHB
how much? I'd rather get those than some brand I've never heard of
I'll have to get back to you on that...
SIborland
10-16-2002, 01:18 PM
I went with the Eibach kit for the base model RSX, great buy!
i just purchased these adjustable camber control arms by spc. the shop i bought them from verified with SPC that these will fit the '02 Si's
http://www.spcperformance.com/PerfPartSect/PerfPartImages/67230.jpg
here's the link to their honda applications page
http://www.spcperformance.com/PerfAppsSect/PerfApps_Honda.html
sicivic2002
10-16-2002, 01:54 PM
I have those exact arms on my car right now.
good deal. how do u like them? installation wasn't too difficult was it? it looks like a 4th grader can do it
sicivic2002
10-16-2002, 02:16 PM
I didn't put them in but I bet it would be pretty easy from what I saw. I had them installed when my springs were installed.
SmoothOperator
10-16-2002, 02:43 PM
I'd question doing it yourself. You might as well have your dealership install them, cause you'll probably need an allignment afterwards.
ssvr6
10-16-2002, 04:40 PM
Ok, how much did everyone pay? I'm dying here!
;)
Steve
sicivic2002
10-16-2002, 04:42 PM
I think I was charged about 78.00 for each side. Not including install.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.