fASTBACK
04-22-2004, 09:06 PM
I have this Double X-brace from D3 that I am trying to put in.
I got all of the bolts to be tightend except for the front 2 which are the control arm bolts.
They keep on turning and the bar is flushed with the cross member already.
Passenger side stays flush but the bolt keeps on turning
Driver side will not stay flushed and will keep turning also.
Did I strip it? Im really frustrated with this bar. I don't know what to do.
Help me please. I'm thinking about taking off the bar completely and see if it is really striped.
Thanks,
Mike
I got all of the bolts to be tightend except for the front 2 which are the control arm bolts.
They keep on turning and the bar is flushed with the cross member already.
Passenger side stays flush but the bolt keeps on turning
Driver side will not stay flushed and will keep turning also.
Did I strip it? Im really frustrated with this bar. I don't know what to do.
Help me please. I'm thinking about taking off the bar completely and see if it is really striped.
Thanks,
Mike