PDA

View Full Version : stereo install



02whitesi
07-06-2002, 12:34 PM
how do you take out the factory head unit?

2k2civicSi
07-06-2002, 12:45 PM
un screw the knob then pop the lowerdash out with a screw driver the unscrew the top part take off the ac knobs and your done its not hard at all

02TafWhtSi
07-07-2002, 06:54 PM
when you pop off the lower portion with a screwdriver don't you get little nicks and cuts in the black plasitc and on the silver section as well?

2k2civicSi
07-07-2002, 07:20 PM
i have the carbon dash so i duno if its nicks the silver paint of if your careful i owuld think not

02whitesi
07-09-2002, 07:13 PM
be extremely careful it chips easily i did am putting on the carbon fiber dash

ColinCivicSiR
07-09-2002, 08:40 PM
DON'T use a screw driver!!!!!!!!

Unscrew the knob then reach in the shift boot pushing it back inside the dash a bit, then grab it firmly on both sides of the shift opening and pull. I pulls out somewhat easily.

try this link for instructions on the rear CD changer install.........also includes how to remove stereo deck.


http://www.collegehillshonda.com/instructions/02si/cdchanger.pdf

Colin

i-WERKS
07-12-2002, 11:28 AM
I wish I had this info earlier.