PDA

View Full Version : RSX TYPE S Suspensions Swap???



gepetto411
05-06-2004, 04:49 PM
Will the struts and springs from a 2002 RSX-S direct swap on a 2003 EP? Will I need a camber kit?

Peking
05-06-2004, 04:54 PM
Originally posted by gepetto411
Will the struts and springs from a 2002 RSX-S direct swap on a 2003 EP? Will I need a camber kit?

Why?

graham
05-06-2004, 07:16 PM
Will I need a camber kit?

Nope ... what you'll need is a RSX.

They are not compatable.

97 TYPE-R 312
05-08-2004, 12:22 AM
Originally posted by graham
Nope ... what you'll need is a RSX.

They are not compatable.

Are you sure about this?

-Victor

Suk02Si
05-08-2004, 03:37 AM
what specifically are you wanting to swap into your car? shocks, springs?

The rear shock will bolt up just fine with the ep, the front rsx shocks use a larger diameter tie rod end bolt. You'll need to pick up a pair of rsx tie rod ends(roughly $70) and use those. I think the lower two bolts are also a different diameter.

Springs from an rsx will fit ep shocks no problem, but the front are slightly softer and the rear are progressive and have more coils.

http://www.ephatch.com/forum/showthread.php?threadid=18477&highlight=rsx%2A+spring

Jpax
05-08-2004, 08:45 AM
Isn't the 2 big bolts that bolt it to the hub assy. larger also?