PDA

View Full Version : What's your angle? A camber question.



hutchback
05-07-2004, 01:48 PM
I recently had a Tein Type Flex dampening system installed on my Si. I need a rear camber adjustment kit. What would all of you reccomend?

hutchback
05-07-2004, 01:50 PM
Other than I spell recommend correctly:o

Mickey
05-07-2004, 06:00 PM
SPC Camber kit. You can do Front and Rear If you want but our rear are the ones that really get affected. I did Rear camber kit for my EP since the fronts were not actually affected. I have 215/45/17 and H&R Sport springs. Approximately 2 inch drop. :D

Lucid Moments
05-07-2004, 09:32 PM
Depends on what you want. I ride with mine straight. 0 camber and 0 toe. Or at least as close as they can get it. But then mine is primarily a daily driver.
If you aren't worried about tire wear you can go as much as -2 degrees camber, it will give you some serious help around the corners, but won't help on the straight line any.

Suk02Si
05-08-2004, 03:44 AM
-2 deg in the rear will help you understeer more. :)

a little toe in and no more than -1deg of rear camber should be good for daily driving.

For the one autox i attended I ran -2.5 up front and -1 in the rear.

hutchback
05-08-2004, 05:30 AM
I am currentlt running a -2 in the rear, but want to adjust it to a -1. My Si is my daily driver so I would like to put as little wear on the tires as possible.