VTEC Controller?

[iVTEC 04 Si]

I'm looking for a good VTEC controller for my EP, I dont want Hondata because I dont want to raise the rev limit of my car. I want something I can just plug in and go. Any suggestions? Thanks in advance.

[darkvibe]

Your Si has i-vtec different than the rsx-s and other hondas. It runs on 12 valves up to 2200 rpm and 16 valves above that. It's a gas saving thing, not a power thing. You probably don't want to change it. There are no high and low duration cam lobes.

[iVTEC 04 Si]

Hmm.. but what about the performance modules and VTEC controllers I've heard about for the EP?

[iVTEC 04 Si]

What about this?


http://www.apexi-usa.com/electronics_vafc.asp

[Tenacious G]

changing the VTEC engagement won't do you any good really. all you'd be doing is shifting when the engine runs on 12-valve operation and switches to 16-valves.

if you really want A/F control, just get the SAFC.

[the JigGa mAn]

Originally posted by Tenacious G
changing the VTEC engagement won't do you any good really. all you'd be doing is shifting when the engine runs on 12-valve operation and switches to 16-valves.

if you really want A/F control, just get the SAFC.

what he said..plus search b.c this has been covered alot