PDA

View Full Version : Proper Way



VBP2004EP3
05-21-2004, 03:00 AM
What is the proper way of removing the pin stripe and the iVtec decals?

cdr127
05-21-2004, 04:43 AM
Use the heat from a heat gun or very hot blow dryer to heat the decals. Be very carefull not to get the paint to hot it will discolor. Don't get it so hot you can't touch it just warm enought to peal decals off. If using a heat gun don't hold it to close to the paint. Slowly peal the decals off. When finished and decals are gone, use goo gone or some other paint safe glue remover ot get rid of adhesive left behind. Then clean and wax your car. If after you use the glue remover, there is still a haze, a little light buffing should take car of it. :D

Ep3 No.2
05-21-2004, 08:28 AM
all u do is

goo gone
peel
goo gone
peel
wax
polish

its just like removing any other kind of sticker/emblem

VBP2004EP3
05-21-2004, 10:07 AM
Actually I had to take it to the dealer to have them buff it one last time and the took everything off but thier decal so when i got home i took of thier decal... now it looks sexy and clean