PDA

View Full Version : Base Rsx Jrsc



TheAnhDy
06-10-2004, 11:57 PM
Crappy quality but this would have to do for now. "Just to give you guys an idea"

-Granny shifting
-No camera man
-Holding the camera in left hand and shifting with right hand
-Launched at idle with only about 60% throttle in 1st gear (I can't get traction if I flowed it)
-Shut down after shifting to 3rd gear because didn't want to drive from 0-95mph without hands on steering wheel.
-It's a dead empty street with one one around
-The camera was blocking my eye view of the tach, I had to shift by looking through the 1.5" view finder of the camera (not real time)
-Windows were all up
-18" wheels

RIGHT CLICK AND SAVE AS
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wNDMwMDA1NnM0MTNkZmQzMXk1NDE=

johnkimble
06-11-2004, 12:47 AM
edit: Save his bandwith, click HERE (http://www.we-todd-did-racing.com/wetoddimage.wtdr/wNDMwMDA1NnM0MTNkZmQzMXk1NDE%3D)

TheAnhDy
06-11-2004, 08:40 AM
thank you for hosting

johnkimble
06-11-2004, 11:34 AM
sweet video btw... do you jrsc guys have trouble with traction? sounds like it gets squeely at high rpms even in 1st gear?

SF-SI-02
06-11-2004, 11:56 AM
You have hondata right? Or does the rsx ecu allow you to get to 60 in second stock? I tried timing it with my watch (I know pathetic) but I had a hard time getting your 0-60 over 5 seconds... what else have you done to that beast?

Thanks

TheAnhDy
06-11-2004, 08:41 PM
Originally posted by SF-SI-02
You have hondata right? Or does the rsx ecu allow you to get to 60 in second stock? I tried timing it with my watch (I know pathetic) but I had a hard time getting your 0-60 over 5 seconds... what else have you done to that beast?

Thanks

I wasn't trying to launch the car other wise I would have no traction. I started moving at idle with about 60% throttle. I never floored it in 1st otherwise I would lose traction and spin out forever. I wasn't trying to do a good 0-60 run because I was shifting fairly slow. The video is just to give you an idea of the jrsc whining and tach moving

These are my mods

2002 Acura RSX

ENGINE
Jackson Racing Supercharger Race Version
RC 440cc Fuel Injectors
Hondata K-Pro Programmable ECU
Hondata Intake Manifold Heat Gasket
AEM cold air intake
Jackson Racing Race Header + Testpipe
RSX Type S Exhaust
Energy Suspension Motor Mount Inserts
Revotechnica short shifter
Ground wire
Throttle Body Coolant Bypass

EXTERIOR
JDM style black headlights
JDM Integra Type R lip
Type Zero side skirts
OEM rear underspoiler
VIS Carbon Fiber Hood
Redout tail lights

INTERIOR
Autometer Air/Fuel Ratio gauge
Autometer Boost/Vacuum gauge
Axas Shift Light
Aluminum Dash Trim

WHEELS/SUSPENSION
Eibach Sportline Springs
Ingalls camber kit
Progress Rear Sway and Tie Bar
Autotechnic Upper Front Strut Bar
Autotechnic Rear Strut Bar
5-Zigen FNO1R-C 18x7.5
Toyo Tires 225/40/18

SOUND/VIDEO
Pioneer 8400MP head unit
JBL 300.1 mono amp
Alpine Type R 12" sub
Subzero sealed enclosure

http://www.uploadimages.net/images/413272DSCF0049.JPG
http://www.uploadimages.net/images/252832sidecut.JPG
http://www.uploadimages.net/images/408093DSCF0051.JPG
http://www.uploadimages.net/images/647693Picture40.jpg
http://www.uploadimages.net/images/215500DSCF0042.JPG
http://www.uploadimages.net/images/558029DSCF0050.JPG
http://www.uploadimages.net/images/976796DSC00472.JPG
http://www.uploadimages.net/images/747549DSC00482.JPG
http://www.uploadimages.net/images/590565DSC00207.JPG
http://www.uploadimages.net/images/313614DSC00475.JPG

Jonny221
06-12-2004, 05:37 PM
dude your car is pimp!!! i love where you put the gauges. hey does the jrsc race version fit on ep's ? and how much did you pay for it and what do you think your 1/4 times are ? nice ride dude.

TheAnhDy
06-12-2004, 05:50 PM
Originally posted by Jonny221
dude your car is pimp!!! i love where you put the gauges. hey does the jrsc race version fit on ep's ? and how much did you pay for it and what do you think your 1/4 times are ? nice ride dude.

It's not production model. I have the prototype because I was the test car. It's not released yet. It's a base rsx not a type s

Jonny221
06-12-2004, 07:51 PM
i know its a base what do you think the 1/4 times will be becasue im trying to decided on jrsc or turbo do you think u will be in the 13.9999 ? is it just awesome or wat ?

eurosteez
06-15-2004, 02:33 PM
cleanest rsx I've seen;)

myeverlovinsir
06-15-2004, 03:13 PM
That setup won't fit in the EP. It's laying flat. Ours is a shorter engine bay and that manifold and layout would interfere. I also noticed that the RSX fuel rail has the connection with the large hex nut and (don't know what its called) on the right side. Our fuel rail has that in the middle where the indent on the maifold is shown in your pic. It's a problem to fit our rail properly with larger RC injectors because of it. Clean ride.;)

Jonny221
06-15-2004, 05:15 PM
HEy TheAnhDy guy with the clean rsx do you live in Tujunga ? If so do you live by Ron Depompa ?

TheAnhDy
06-15-2004, 10:20 PM
Originally posted by Jonny221
HEy TheAnhDy guy with the clean rsx do you live in Tujunga ? If so do you live by Ron Depompa ?

Nope

Jonny221
06-16-2004, 10:53 AM
what Socal city do you live in ? I live in Glendale i want to check out your ride. If your close to me.

schreff
06-16-2004, 12:04 PM
Nice whip, very clean.

the giant ep3
06-16-2004, 04:00 PM
i still hate seeing the ps pump on a K20A3, but your car is very clean. the wheels are a nice touch, but not too bling bling and then the cf hood adds a lot to it. nice ride